Subscribe to Our Youtube Channel
Related Manuals for JK-Products R PRO IR EVIVE Laydown JK 199
Summary of Contents for JK-Products R PRO IR EVIVE Laydown JK 199
- Page 1 Operating instructions EVIVE PRO IR Laydown Model-No.: JK 1 99 RV 0-46 1030889-00C / us-en / 02.2024...
- Page 2 Customer Service JK Products & Services 411 West Washington Avenue Suite B Jonesboro, Arkansas 72401 800-445-0624 870-935-9046 http://jkproducts.us/service Manufacturer JK-Products GmbH Rottbitzer Str. 69 53604 Bad Honnef GERMANY Tel.: +49 (0) 22 24 / 818-140 Fax: +49 (0) 22 24 / 818-166 WARNING! Read these operating instructions.
-
Page 3: Table Of Contents
Table of Contents Table of Contents What certain words and signs mean (Glossary)....6 Definitions ................. 6 Warning signs ................7 Symbols on the device ............. 8 What this device is ............. 9 Guidelines.................. 9 Export ..................9 Scope of delivery ..............9 3.3.1 Options .................. - Page 4 Table of Contents What you must do to avoid other harm ......24 General ..................24 REVIVE system ............... 24 Sensor ..................24 Vibra Shape - vibration plate ..........24 Foreseeable misuse ............... 25 Obligations of the studio operator ......... 25 Staff training ................
- Page 5 13.1 Troubleshooting ..............55 Where you can find out more ........... 56 How we studied this device ..........57 Appendix ................. 58 JK-Products, Inc. – Limited Warranty ......59 17.1 Limited Acrylic Warranty ............60 17.2 Warranty Claims ..............61 17.2.1...
-
Page 6: What Certain Words And Signs Mean (Glossary)
What certain words and signs mean (Glossary) What certain words and signs mean (Glossary) Definitions Studio operator People who provide devices to users on a commercial basis. The stu- dio operator is trained to operate and maintain the device and is re- sponsible for the orderly operation of the device as well as compli- ance with the maintenance intervals. -
Page 7: Warning Signs
What certain words and signs mean (Glossary) Warning signs Danger notices, nonobservance will lead to death or serious injury: DANGER! Type and source of danger, e.g. 'DANGER – High voltage!' Description of the consequences, e.g. 'You can be killed or injured by an electric shock!' Countermeasures: –... -
Page 8: Symbols On The Device
What certain words and signs mean (Glossary) Symbols on the device The following symbols are displayed on the device or on the packag- ing: Manufacturer, company address Read the operating instructions! Where there are great differences in temperature between the transport route and the installation site the device may not be put into operation immediately after being set up. -
Page 9: What This Device Is
What this device is What this device is Guidelines This product is in conformity with UL STD 482 and fulfils the require- ments for the exempt group according to IEC 62471. Export This device is exclusively intended for use in the USA and may not be exported to other countries and operated there! The manufacturer as- sumes no liability whatsoever in the event of non-compliance. -
Page 10: Device Description
What this device is Device description 1. INTERIOR DISPLAY 2. Red Light & Near Infrared LEDs, canopy 3. Handle, canopy 4. Red Light & Near Infrared LEDs, base 5. Body cooling with AROMA Options Not applicable for this device. Function description See page 31 for information on control and operation of the device and its features. -
Page 11: Transport
What this device is Transport Installation location This product is suitable for fitness studios or similar installation loca- tions. You may find detailed information on installation and setting up in the Installation Instructions (see folder Technical Documentation). 3.8.1 Ventilation NOTICE Danger of failure! Danger of overheating by obstruction of the air routing. -
Page 12: Setup Location
What this device is 3.8.2 Setup location WARNING! Sudden movements and malfunctions! Crushing hazard. – The device is not suitable for operation in mo- bile facilities (ships, buses, trains). Risk of falling! Risk of being injured by falling ob- jects! Ceilings and joists may break if the load per square foot is too high! –... - Page 13 What this device is NOTICE Salty air! Contaminated air! Device damage due to corrosion of the housing and electrical com- ponents. – Do not install the device near swimming pools. – Do not operate the device in locations with aggressive environ- mental conditions (e.g.
-
Page 14: Commissioning
What this device is 3.8.3 Commissioning DANGER! Damaged mains power cable! Danger to persons through electric shock or burns. – Only the manufacturer or specialist companies are permitted to replace the mains power cable. Initial commissioning will be undertaken by the manufacturer's own service personnel or by a (Level 3) JK Factory Certified Technician. -
Page 15: Signs And Stickers On The Device
What this device is Signs and stickers on the device Signs which warn of danger areas or give important information on components are attached to the device. Ensure that the instruction signs are always clearly recognizable and easily legible. Any missing instruction signs or stickers must be replaced. - Page 16 What this device is 3: Name plate (example) 4: Sticker 'Follow Operating Instructions' (1014232-..) 5: Sticker 'ESD label for sensitive components' (1029427-..) 16/66...
-
Page 17: Technical Data
What this device is 3.10 Technical data 3.10.1 Power rating, electrical specifications and noise level JK 199 / RV 0-46 Power consumption rating: 1400 W Rated frequency: 60 Hz Rated voltage: 230 V 1 phase Rated overcurrent protection device 15 amp 2 pole* Power supply: SJOOW 14-3 AWG Ingress protection classification:... -
Page 18: Dimensions
What this device is 3.10.2 Dimensions 925 mm 1093 mm H1 = 1322 mm B2 = 1118 mm 2160 mm BK = 2400 mm TK = 1500 mm 3.10.3 Lamp configuration Not applicable for this device. 3.10.4 Accent lighting Not applicable for this device. 18/66... -
Page 19: Spare Parts
What this device is 3.10.5 Spare parts Number Description Order-no. Scent card 1514150-.. Canopy panel 1514013-.. Base panel 1514018-.. Gas pressure spring 1513924-.. SW4 Allen key 84500-.. Protective goggles 1027147-.. For more spare parts, contact Customer Service (see page 2). 02/2024 1030889-00C Operating instructions –... -
Page 20: Why You Use It
Why you use it Why you use it Intended use REVIVE PRO IR Laydown This device is used for the application of near infrared and red-light technology for one person at a time. The device may not be used by people with reduced physical, sensory or mental capabilities or who have insufficient experience and/or knowledge without supervision. -
Page 21: Who Cannot Use It
Who cannot use it Who cannot use it Prohibited usage 5.1.1 REVIVE system The following people must not use the device: Multiple people may not use the device at the same time. People with body weight of more than 330 lbs (150 kg) may not ... -
Page 22: What You Must Do To Avoid Serious Harm
What you must do to avoid serious harm What you must do to avoid serious harm General DANGER – HIGH VOLTAGE! You can be killed or injured by an electric shock! Assembly and electrical connection must comply with national and local regulations. –... -
Page 23: Revive System
What you must do to avoid serious harm REVIVE system WARNING! This device emits electromagnetic fields! EM-Emission inside device: – 5 Hz – 2 kHz max. 2.1 μT (1.5 kV/m) 2 kHz – 400 kHz max. 3.3 μT (1.3 kV/m) 9 kHz –... -
Page 24: What You Must Do To Avoid Other Harm
What you must do to avoid other harm What you must do to avoid other harm General WARNING! Infections can be transferred through skin contact. All items/equipment components, with which the user can come into contact during the application, must be cleaned and disinfected after every ses- sion: –... -
Page 25: Foreseeable Misuse
What you must do to avoid other harm Foreseeable misuse The following uses of the device are explicitly prohibited: Multiple people may not use the device at the same time. People with body weight of more than 330 lbs (150 kg) may not ... -
Page 26: Risks Of Using This Device
Risks of using this device Risks of using this device The following people must not use this system: People younger than 18 Pregnant women People with epilepsy/prone to seizures People with limited/reduced mental capacity People with limited/reduced physical or sensory capabilities ... -
Page 27: Benefits Of Using This Device
Benefits of using this device Benefits of using this device REVIVE PRO IR Laydown The REVIVE PRO IR Laydown benefits the user by enhancing a healthy lifestyle and general wellness. 02/2024 1030889-00C Operating instructions – 27/66... -
Page 28: How To Decide To Use This Device
How to decide to use this device How to decide to use this device This device is intended only for commercial use and not for private use. Some people are not permitted to use the device, see chapter 5. The device may not be used by people with reduced physical, sensory or mental capabilities or who have insufficient experience and/or knowledge without supervision. -
Page 29: What To Do Before The Application
What to do before the application What to do before the application Please check for any conditions that may prohibit the use of this de- vice – see chapters 5, 6, 8, 10. Before the Red Light & Near Infrared LEDs turn on, you have a few minutes to prepare yourself. -
Page 30: How To Use This Device
How to use this device How to use this device 12.1 How to set this device up After commissioning and cleaning/disinfection, the device is ready for operation. See chapter 12.5. 12.2 How to make sure the device works Before using the device, check for damage to acrylic panels. 12.3 How to use it to treat your condition... -
Page 31: How To Operate The Device
How to use this device 12.5 How to operate the device Symbol Information START / STOP Body cooling Red Light & Near Infrared LEDs 12.5.1 Control Center Not applicable for this device. 12.5.2 User settings overview Not applicable for this device. 02/2024 1030889-00C Operating instructions –... -
Page 32: Functions
How to use this device 12.6 Functions INTERIOR DISPLAY 1. START / STOP BUTTON 2. BODY COOLING (display) 3. BODY COOLING (button) 4. MINUS (button) 5. PLUS (button) 6. Application time / Fan / Red Light & Near Infrared LEDs display 32/66... -
Page 33: Navigation
How to use this device 12.6.1 Navigation Icon selection / Description/display Information Key sequence PLUS button Pressing this button changes the time setting. MINUS button Pressing this button changes the time setting. Time setting In standby mode, press the plus or minus but- ton to change the time. -
Page 34: Info / Maintenance / Button Lock
How to use this device 12.6.2 Info / Maintenance / Button lock Icon selection / Description/display Information Key sequence Info-Mode Press and hold for 3 seconds. press Deactivating the button lock: Press for 3 seconds to lock the unit. Activating the button lock: Press for 3 seconds to unlock the unit. -
Page 35: Timer Settings / External Timer Setting
How to use this device 12.6.3 Timer settings / External Timer setting Icon selection / Description/display Information Key sequence Timer Press and hold for 3 seconds. press Activating the EXTERNAL timer Press for 3 seconds to change the mode. External timer is activated Press briefly for the Standby mode. -
Page 36: Connections
How to use this device 12.11 Connections Not applicable for this device. 12.12 How to use NOTE: Before use the device must always be cleaned and disinfected! See chapter 12.15 How to clean/disin- fect. 12.12.1 How to start The device is started with an internal timer. You can switch on the REVIVE PRO IR Laydown at any time by press- ing the START/STOP button –... -
Page 37: Application Tips
How to use this device 12.12.2 Application tips Behavior before, during and after an application: Proper operation is not possible with the canopy open. Lie down and place your head on the headrest or as indicated by the ergonomic base panel to maintain the proper distance be- tween skin and lamps. -
Page 38: What To Do After The Application
How to use this device 12.13 What to do after the application 12.13.1 Cleaning and disinfection WARNING! Infections can be transferred through skin contact. All items/equipment components, with which the user can come into contact during the application, must be cleaned and disinfected after every ses- sion: –... -
Page 39: Safety Instructions For Cleaning/Disinfection And Maintenance
How to use this device 12.14 Safety instructions for cleaning/disinfection and maintenance DANGER – HIGH VOLTAGE! You can be killed or injured by an electric shock! During maintenance and service work there is a risk of touching live parts and receiving a fatal electric shock. - Page 40 How to use this device WARNING! Danger of burns from hot device parts! If the REVIVE PRO IR Laydown was operated before being switched off and opened - housing parts may be hot. – Before replacing spare parts, wait until metal parts of the device have cooled down suffi- ciently.
-
Page 41: How To Clean/Disinfect
How to use this device 12.15 How to clean/disinfect WARNING! Infections can be transferred through skin contact. All items/equipment components, with which the user can come into contact during the application, must be cleaned and disinfected after every ses- sion: –... -
Page 42: Cleaning And Disinfection Of Surfaces
How to use this device 12.15.1 Cleaning and disinfection of surfaces Acrylic panel NOTICE Do not rub with a dry cloth – danger of scratching! – Other cleaning agents, especially concentrated disinfectants or solvents (e.g. Lysoform, ethyl alcohol or other liquids containing alcohol) must never be used for cleaning. -
Page 43: Cleaning/Disinfection Plan
How to use this device 12.15.2 Cleaning/disinfection plan Component Interval Activity See page Handle Clean and disinfect Acrylic glass panel Clean and disinfect Canopy panel Clean INTERIOR DISPLAY Clean and disinfect Surfaces Clean Clean Protective goggles Clean and disinfect Ventilation slots Clean (vacuum) 02/2024 1030889-00C... -
Page 44: How To Maintain
How to use this device 12.16 How to maintain 12.16.1 Technical modifications The device has been constructed in accordance with current safety regulations. The illustrations and specifications on these instructions are subject to technical modifications which are required in order to improve the device. - Page 45 How to use this device Maintenance performed by the studio operator or a JK Factory Certified Technician Component Interval Activity See page Acrylic panel, base Replace Acrylic panel, canopy Replace 02/2024 1030889-00C Operating instructions – 45/66...
-
Page 46: Cleaning And Maintenance Work Preparation
How to use this device Maintenance performed by authorized, trained and qualified staff WARNING! Danger to persons from maintenance work that has not been carried out! If maintenance work is not carried out, it can lead to material damage or personal injuries! –... -
Page 47: Cleaning And Disinfection Of The Sensor
How to use this device Starter Not applicable for this device. High pressure lamps and filter panels Not applicable for this device. 12.16.5 Cleaning and disinfection of the sensor Not applicable for this device. 12.16.6 Disassembly for maintenance and cleaning work NOTICE Acrylic panels unusable due to soiling! Soiling on the panels is burned in by the hot and results in the long... -
Page 48: Removing The Canopy Panel
How to use this device 12.16.7 Removing the canopy panel NOTE: The base panel must be closed before the canopy panel is dismantled. – Release and unscrew the five screws. NOTE: Remove the outside screws first and then remove the screws in the middle. –... -
Page 49: Removing The Acrylic Panel
How to use this device – Remove the canopy panel with the aid of a helper. The assembly is the same process in reverse order. When assembling please note: – Use the scratch protection. – Carefully lay the canopy panel in the guide. –... - Page 50 How to use this device – Push the base panel to the rear with one hand and pull it out of the front guide. – With a second person to help you, remove the base panel and carefully place to one side. The assembly is the same process in reverse order.
-
Page 51: Changing The Aroma Card
How to use this device 12.16.9 Changing the AROMA card – Insert the AROMA card into the side opening on the fan. 12.16.10 Cleaning the ventilation slot – Use a vacuum cleaner to clean the ventilation slot. 12.16.11 Cleaning or replacing lamps and filter panels in the canopy Not applicable for this device. -
Page 52: Cleaning Or Replacing The Front Panel Accent Lighting
How to use this device 12.16.15 Cleaning or replacing the front panel accent lighting Not applicable for this device. 12.16.16 Cleaning the filters Not applicable for this device. 12.16.17 Cleaning the filter mats Not applicable for this device. 12.16.18 Cleaning the filter mats in shoulder tanner Not applicable for this device. -
Page 53: How To Store The Device
How to use this device 12.17 How to store the device 12.17.1 Decommissioning The device must be disconnected from the power supply in order to temporarily or permanently decommission it. You must abide by the legal disposal requirements when permanently decommissioning the device. -
Page 54: What To Do When Things Go Wrong
What to do when things go wrong What to do when things go wrong – Seek medical advice if in doubt! 54/66... -
Page 55: Troubleshooting
What to do when things go wrong 13.1 Troubleshooting If the INTERIOR DISPLAY does not show 00:00 within 5 seconds: – switch the Master switch to ‘On’, – please contact Customer Service. For authorized, trained and qualified staff: For further technical description, please contact Customer Service (see page 2). -
Page 56: Where You Can Find Out More
Where you can find out more Where you can find out more If you have any questions, please contact Customer Service (see page 2). 56/66... -
Page 57: How We Studied This Device
How we studied this device How we studied this device The system is built to the state of the art and the applicable safety regulations. We reserve the right to make technical changes which are necessary to improve the system or a system component even if they deviate from pictures and information in these instructions. -
Page 58: Appendix
Appendix Appendix Not applicable for this device. 58/66... -
Page 59: Jk-Products, Inc. - Limited Warranty
JK-Products, Inc. – Limited Warranty JK-Products, Inc. – Limited Warranty JK-Products, Inc. warrants its products to be free from defects in ma- terials and workmanship under intended normal use as described in the unit's Operation and Installation Instruction, for a period of one (1) year from date of sale. -
Page 60: Limited Acrylic Warranty
JK-Products, Inc. – Limited Warranty 17.1 Limited Acrylic Warranty JK Products, Inc. warrants its acrylic sheets to be free from defects in material and workmanship, under intended normal use, for a period of one (1) year from date of sale of the appliance or 1,200 hours of oper- ation whichever comes first. -
Page 61: Warranty Claims
Warranty Claim will be consid- ered. 2. Where to call to place a Warranty Claim: JK-Products, Inc. is supported nationwide by an extensive dealer/dis- tributor network through whom the majority of our units are sold. These dealers/distributors are required by contract to stock sufficient parts to meet the various warranty and nonwarranty needs of their customers. -
Page 62: Labor Warranty Claim/Credit Procedures
JK-Products, Inc. – Limited Warranty You must comply to the instructions and warnings under chapter: 4.1 Intended use 5.1 Prohibited usage 6 What you must do to avoid serious harm Any other use shall be considered improper. The manufacturer cannot be held liable for damage or injuries resulting from misuse. -
Page 63: Limited Lifetime Warranty
JK-Products, Inc. – Limited Warranty 17.3 Limited Lifetime Warranty Global Service USA warrants specific individual components of the beauty system against defects in materials and workmanship for the life of the product. Coverage is limited to units purchased after No- vember 1, 1994. -
Page 64: Index
Index Index Air routing ....................11 Application ..................... 35 Application times ................... 30 Application tips ..................37 Base plate Load....................17 Changing the AROMA card..............51 Cleaning .....................38, 41 Cleaning/disinfection Cleaning intervals ................43 Commissioning ..................14 Control Center ..................31 Cosmetics .................... - Page 65 Index Maintenance schedule Wear parts ..................44 Noise level ....................17 Obligations of the studio operator ............25 Operating altitude .................. 12 Order numbers ..................19 Packaging ....................53 Plastic surfaces (care) ................42 Power rating ................... 17 Prohibited usage ..................21 Protective goggles .................
- Page 66 Index 66/66...
Need help?
Do you have a question about the R PRO IR EVIVE Laydown JK 199 and is the answer not in the manual?
Questions and answers