Table of Contents
Advertisement
Connections
The Connections allows the creation, deletion, and management of input-output connections.
The Statistics tab includes all connected input/output status indicators and an overall summary
status indicator, which allows the operator to immediately pinpoint errors.
Connections Configuration Tab
The Connections configuration tab is depicted below. The message "Connection Table Empty"
will be displayed if there are no configured input/output connections in the 9220. As indicated in
the figure, the Connections configuration area is divided into two parts: a source port selection,
and a destination port selection.
To establish a connection, simply select a source (and optionally a backup source), a destination,
and then click on Apply.
Source Selection
The Source Selection area is available in the Connections tab, as well as in the ASI Ports and IP
Outputs tabs. This allows the operator to establish a connection to a given output as that output
is being configured. The operation is the same regardless of the location of the control.
The Source Port Selection is a two-step process:
38
Source
Selection
Destination
Selection
9220-UM V1.2
Advertisement
Table of Contents
