Table of Contents
Advertisement
I With a DSS Receiver
I
You can:
1) Recordand viewany channelincluding
scrambledchannels;channelselection
mustbe made at the DSS Receiver.
2)
Programone channelfor unattended
recording.
NOTE: The DSS receivermustbe turnedoffto
viewpmgrarnsfrom a cableboxor
antenna.See the DSS manual for details.
IN FROM
CABLEor Antenna
DSS
IN FROM
Satellite Dish
IN FROM ANT.
**DSS _) is a registered trademark of DIRECTV, INC., a unit of GM Hughed Electronics.
OUTTOTV
VHF/UHF
Audio/Video
Connections
I
If yourTV hasAUDIO IN andVIDEO IN terminals,youcan connectyour
VCR to them to receivea higherqualitypictureandsound.If yourTV is not
stereo,youcan connecta stereoamplifierto the VCR to enjoystereosound.
FROMANT
_,
) IN
1
Connect the VIDEO OUT terminal on the VCR to the VIDEO IN terminal of your TV.
2 Connect the AUDIO OUT terminals on the VCR to the AUDIO IN terminals of your TV.
3 Set the VIDEO/TV selector of your TV (Monitor/Receiver) to =VIDEO."
NOTE:
To use yourTV as a VCR monitor,set the VIDEO/TV selectoronthe TV (Monitor/Receiver) t o =VIDEO."
Note to CABLEsysteminstaller:.
This reminderis providedto call the CABLEsysteminstaller's attentiontoArticle820-40_0.J the NEC in USA (and to the
Canadian Electrical C ode in Canada)that providesguidelines for propergrounding and, in particular, s pecifiesthat the
cable groundshallbe connectedto the groundingsystemofthe building, a s closeto the pointof cableentryas practP..al.
9
Advertisement
Table of Contents
