Table of Contents
Advertisement
Copying Your Tapes
Dubbin )
Connections
you'll need to make.
• When connecting to a normal VCR, use the L Audio In jack for proper sound reproduction.
Playing (Source) VCR
Recording (Editing) VCR
TV for Monitoring
1
Insert a pre-recorded
tape into the Playing
(Source) VCR.
t
2
Insert a blank tape with
record tab into the
Recording (Editing) VCR.
W
3
Select "LINE" Input mode on the
Recording (Editing) VCR. (.See "Selecting
the Input Mode" at right.)
4
Press PLAY on the Playing VCR.
Press PAUSE at the desired starting point.
5 Press REC on the Recording VCR, and then
press PAUSE immediately thereafter.
To Monitor
Dubbing
on Your TV
1
Tum your TV on and tune to the Recording
VCR channel (CH3 or CH4).
2
Set the VCR/TV Selector on the Recording
VCR to "VCR."
i
Selecting
the Input Mode
Press INPUT.
The display will change in the order below.
_.--_ Channel
Number ------_
LINE---_
OF
Press CH AJV.
Tl_e display will change in the order below.
(CABLE)
E.<-_-- 125 or
6
Press PAUSE on both VCRs at the s_me.
time, to be,ain cooyina.
To Edit Out Unwanted Parts
Press PAUSE on the recording VCR while copying is
in progress. Press PAUSE again to resume copying.
7
Press STOP on both VCRs to StOD coovina.
• When LINE is selected, =L" is displayed in the Multi
Function Display for about 4 seconds.
Caution:
Unauthorized e.,y_hanging and/or
copying ofcopyrighted recordings
may be copyright i nfringsment.
23
Advertisement
Table of Contents
