Table of Contents
Advertisement
VCR cannotbe remotecontrolled...
ACTION and PROG buttonscannotbe used...
Programs cannotbe viewedon TV...
Video cassettecannotbe inserted...
Videocassette cannot b eremoved...
Video cassette ejects when a recording is started
or the power is turned off for timer recording...
In Stop mode,the motor(CYLINDER) continues
to rotate...
The topof the playbackpicturewaves backand
forth excessively...
• Aim the RemoteConb'ol d irectlyat the remotesensoron the VCR.
(P.10)
• Avoidall obstacleswhichmay interferewiththe signalpath.
• Inspectthe remotebatteriesfor possiblereplacement.(P.4)
• Make sure thatVCR LOCK is setto off. (P.26)
• Exposing the VCR remotesensorto directfluorescent or outdoor
lightmay causesignalinterference.
• Press the VCR button to select VCR mode. (P.25)
• Set the VCWI"V selector to "TV." (P.17)
° Insert the cassettewithwindowsideup; recordtab facingyou.
• Completelyinsertthe PowerPlugintoan AC wall outlet.
• Make surethe record tab is intacton the cassette.(P.5)
• To enablethe quick playmechanism, t he cylinderwill rotatefor
about5 minutes.Thisreducesresponsetime fromStopto Play
modefrom Playto RewindSearchmode.
Because the VCR playback signal is not as stable as an off-the-air
"IV signal, the top of your TV screen may be bent or unstable
during playback. Slowly turn the horizontal hold control on your
TV to correct the wavy picture. If your TV does not have a
horizontal hold control or adjusting the control does not help,
please contact your local TV service center.
29
Advertisement
Table of Contents
