Kin Multirain Jet User Manual page 4

Self Priming Jet Pumps
GB
1. Safety Measures
Before starting the pump, read this instruction booklet carefully and keep it
in a safe place for future reference. The pump must only be used for the
purpose for which it was designed. For safety reasons the pump must not
be used by anyone under the age of 16 or by anyone who has not read and
understood the present instructions booklet.
The mains cable, suction hose and discharge hose must never be used to
carry or move the pump. If available, use the handle, if no handle is available,
grasp the pump by the motor and the pump housing.
When handling the pump, while it is connected to the electric power
supply, you should avoid all contact with water.
Never remove the plug by pulling on the power cord.
Before taking any action on the pump, always remove the plug from the
power socket.
If the power supply cord has been damaged, it must be replaced by the
manufacturer or its authorized customer support service in order to avoid
all risks.
The pump is equipped with a thermal overload safety device. In the event
of any overheating of the motor, this device automatically switches off the
pump. The cooling time is roughly 15 to 20 minutes, then the pump
automatically comes on again. If the overload cutout is tripped, it is
essential to identify and deal with the cause of the overheating. Read
chapter 5: Troubleshooting.
4
kinpumps.com