Table of Contents
Advertisement
30" Wide-Format LCD-TV User Manual
Installation Guide
You will soon be enjoying your LCD-TV. The following are instructions on what parts to expect to
find within the box, how to connect your LCD-TV and how to use your remote to setup and configure
basic options.
Unpacking
To open the shipping box, stand the box upright and locate the two white plastic clips on the lower
left and right ends of the box. Remove this clip by reaching behind the plastic door and unlatching
the clasp on the top edge of the clip. The entire plastic clip should come out easily. Lift the top
half of the box off of the LCD-TV.
Carefully remove the LCD-TV and other contents from the box. Place the LCD-TV in a safe upright
position with easy access to the connectors located on the rear of the display.
Please confirm the following list of items is included:
LCD-TV w/ attached table stand
Remote control
2 AAA batteries
AC Power cord
VGA cable (analog RGB). This has a large blue connector on each end.
AV cable. (The Yellow connector is for video, the white connector is for left audio channel
and the red connector is for the right audio channel.)
Dust covers (for wall mounting)
Documentation
4
WestinghouseDigital2004
30" Wide-Format
LCD-TV
User'sManual
Advertisement
Table of Contents
