17"
LTV-17v1 LCD TV
QUICK
CONNECT
G U I D E
CONGRATULATIONS on pur-
chasing a state of the art LCD
TV! This Quick Connect Guide
will help you get started in 3
easy steps. On the back you will
find information to maximize
your LCD TV experience.
For complete installation,
usage instructions, and
safety precautions please refer
to the User's Manual.
Westinghouse Digital Electronics
KEYPAD
1
CONNECT THE BASE
CONNECT THE
TUNER
AND POWER
Connect either analog cable or
Attach Base Stand
to LCD Stand Neck
TV antenna wire to the cable
by aligning holes
ready NTSC tuner input labeled
and tabs, pressing in
"Antenna" on the connection
and snapping into
panel.
place. Remove connection
panel dust cover on back of
Note: this step can be skipped if
you do not use these options.
LCD. Connect A/C Power to
power adapter kit by using
enclosed A/C power cable.
Insert smaller end of adapter
cord into DC 19V Input on con-
nection panel.
POWER INDICATOR
REMOVABLE STAND FOR OPTIONAL WALL MOUNTING
2
3
CONNECT A PC
Connect a PC to the VGA
connector and the 3.5 mm audio
cable to the audio input labeled
"Audio In" located on the
connection panel.
CONNECTION PANEL
GO!
Press Power on the keypad to
turn on the LCD. The power
indicator on the front panel of
the LCD glows blue.
Note: If error message
"Input Signal Not Found" is
displayed the front panel of
the LCD glows orange.
www.westinghousedigital.com