Accessory Connector - Sony MICROFILM CDP-502ES Service Manual

'CDP-502ES/620ES CDP-502ES/620ES
@ LINE OUT/PHONE LEVEL control
This control adjusts the output levels for both the LINE
OUT VARIABLE jacks @ on the rear panel and the HEAD-
PHONES jack @® on the front panel. Output level in-
creases when it is turned to MAX. This control also turns
automatically when operated using the supplied remote
commander RM-D502.
@ DISC indicator
This indicator lights up when the disc compartment is
moving, when the disc compartment has closed with a
disc in place and during disc playing.
You can tell whether a disc is inserted or not even when
the disc compartment is closed by checking this in-
dicator.
@ TRACK indicator
When the disc is inserted using the OPEN/CLOSE key @
or by pressing on the front of the disc compartment @,
the number of selections on the disc is displayed for
several seconds. When play begins, the number of the
selection being played is displayed. When the ® key
@ is pressed continuously and you go past the end of
the last selection, 77is displayed.
If the <q key ® is kept pressed and you go past the
beginning of the first selection, _~is displayed.
® Time counter
When the disc is inserted and the disc compartment °
closed, the total time of all the selections on the disc is
displayed for several seconds. (When the m® PLAY key @
is used, this display does not appear.) When play begins,
the elapsed time the selection has been playing is
displayed.
When the TIME key ® is pressed, the time remaining un-
till the selection ends is displayed after a minus ''—"
symbol. When this key is pressed again, the play time re-
maining is displayed after a minus symbol. The display
varies depending on the setting of the PLAY MODE key
@ and SHUFFLE PLAY key @®.
@ PGM indicator
® INDEX indicator
@ OVER indicator
This indicator lights up when a disc with more than 21
selections is inserted.
—9Q—
@ LINE OUT jacks
This unit is equipped with two pairs of LINE OUT jacks.
The FIXED jacks have a constant output level and the
VARIABLE jacks output level can be changed with the
LINE OUT control @.
The VARIABLE jacks are convenient to use for matching
the playback sound levels of a tuner or other audio
equipment. and the CD player without having to adjust
the volume control of the amplifier.
The VARIABLE jacks output level can be also adjusted
_ with supplied remote commander.
@® PLAY MODE initializing switch
This switch performs the same function as the PLAY
MODE keys @ on the front panel. The setting of this
switch—CONTINUE, SINGLE -or PROGRAM—deter-
mines the mode when power is turned on, so set this
switch to the mode most often used. After the power is
turned on, change the mode with the PLAY MODE keys
@, as this switch does not work once the power is turn-
ed on.
@ ACCESSORY CONNECTOR
This connector can be used to connect an optional
equipment which will be available in the future.