Table of Contents
Advertisement
CDP-502ES/620ES |
Check the antenna terminals, metal trim, "metallized"
knobs, screws, and all other exposed metal parts for
AC leakage. Check leakage as described below.
LEAKAGE
TEST
The AC leakage from any exposed metal part to
earth ground and from all exposed metal parts to any
exposed
metal part having a return to chassis, must
not
exceed
0.5mA
(500
microampers).
Leakage
current
can
be
measured
by
any
one
of
three
methods.
To Exposed Metal
Parts on Set
AC
voltmeter
ia
(0.75 V)
=
Earth Ground
Fig. A.
Using an AC voltmeter to check AC leakage.
FEATURES
Quick operation
@Feather-touch function keys for direct mode change.
e@Linear motor for quick selection search.
Multi-functional
Advertisement
Table of Contents
