Advertisement
Gd) POWER/VOL Control
1. Turn clockwise to turn the monitor on.
Turn counterclockwise to turn the monitor off.
2. Adjust this control for the appropriate audio level.
The Power Indicator will light when the monitor is turned on.
LINE A: Receives video signa! from the VIDEO
IN terminal or S-
VIDEO signal from the S-VIDEO IN terminal, and audio sig-
nal from AUDIO IN terminal.
LINE B: Receives video and audio signals from the VIDEO
IN and
afl
me
AUDIO IN terminals.
@) Underscan Switch
Decreases the overall picture size to allow the corners to be seen.
(QO)
6) Pulse Cross Switch
Receives cross pulse to allow vertical and horizontal syncs to be seen
)
in the picture.
@ Power Indicator
@ LINEA
/ LINEB
Change Switch
z
© BLUE Only Switch
Defeats the red and green signals. This feature is used for monitor
(ELUE)
balancing with the SMPTE color bar signal.
7
@ INT/EXT SYNC Switch
Set the INT/EXT SYNC Switch to EXT Position when connecting an
~ external
composite sync signal to the monitor.
V-HOLD Control
Adjust the V-Hold control if the picture rolls up or down.
(9) CONTRAST Control
Adjust the contrast level for proper overall contrast.
There is a click position for normal level.
(@ BRIGHT Control
Adjust the brightness level for proper overall picture brightness.
There is a click position for normal level.
d) TINT Control
Adjust the Tint control for proper chroma phase of flesh tones.
(2 COLOR Control
Adjust the Color contro! to set the chroma (saturation) level.
Advertisement
