Page 5
Canada. European Conformity Statement unitech Electronics co., Ltd herewith declares that the unitech product is in compliance with the essential requirements and all other provisions of the RED 2014/53/EU directive, the EMC 2014/30/EU directive and the Low Voltage 2014/35/EU directive.
Page 6
MS840P User’s Manual Waste electrical and electronic equipment (WEEE) unitech has set up a policy and process to meet the EU directive 2002/96/EC and update 2003/108/EC concerning electronic waste disposal. For more detailed information of the electronic waste disposal of the products you have purchased from unitech directly or via unitech’s resellers, you shall either...
MS840P User’s Manual Laser Information The unitech product is certified in the U.S. to conform to the requirements of DHHS/CDRH 21CFR Subchapter J and to the requirements of IEC 825-1. Class II and Class 2 products are not considered to be hazardous. The...
It may not be functional anymore. Please only use the original battery from unitech. Using a third party battery can damage our products. Please note that when such damage occurs, it is not covered by your warranty.
Please remove the power adapter when the battery is fully recharged. The bundled power adapter that comes with your unitech product is not meant to be used outdoors. An adapter exposed to water or rain, or a very humid environment can cause damage to both the adapter and the product.
MS840P User’s Manual Worldwide Support unitech’s professional support team is available to quickly answer questions or assist with technical-related issues. Should an equipment problem occur, please contact the nearest unitech regional service representative. For complete contact information please visit the Web sites listed below: Taipei, Taiwan –...
The warranty period is varied from each country. Please consult with your supplier or unitech local office for actual length of warranty period to your purchased product. Warranty becomes void if equipment is modified, improperly installed or used, damaged by accident or neglect, or if any parts are improperly installed or replaced by the user.
MS840P User’s Manual Chapter 1 - Overview 1.1 Package Please make sure the following contents are in the MS840P gift box. If something is missing or damaged, please contact your unitech representative. The standard package contents: Cradle (PN#5500-900039G) ...
MS840P provides users with greater productivity without restrictions, while also supporting high comfort over long periods of use. Its durable functions and convenient wireless design makes the MS840P the ideal scanner for a variety of applications in warehousing, retail and healthcare field. Features ...
2. Switch the MS840P on. Insert a dongle into a USB port of the computer or laptop PC. 4. Scan the MAC address on the label by using the MS840P scanner. 5. When being successfully connected to the dongle, the scanner will beep shortly once with a high tone.
Page 24
MS840P User’s Manual You can also connect the MS840P scanner optionally to another dongle by following the steps made below. 1. Insert another dongle into a USB port of the computer or laptop PC. Scan the MAC address on the label by using the MS840P scanner.
Page 26
MS840P User’s Manual Insert a USB dongle into the USB port of the cradle. 6. Scan the MAC address on the label by using the MS840P scanner. 7. When being successfully connected to the dongle, the scanner will beep shortly one time with a high tone.
MS840P User’s Manual 1.5 LED Indicator / Beeper Sequence 1.5.1 LED Indicator The LED lights on the MS840P scanner turn on to indicate the status of the battery, a successful read of a barcode, or the status of the wireless connection.
Page 28
MS840P User’s Manual 1.5.2 Beeper Sequence The MS840P uses beeps to give you audio feedback when it performs some functions. For example, you hear a beep each time you scan a valid barcode. Beep Sequence Description One long beep with a medium tone Trigger is pressed to power on the scanner.
(low tone) and its LED indicator will become solid red and go off quickly. You are advised to get back to range. MS840P features 2 memory mode settings: Batch Mode and Inventory Mode Note: The 2MB of memory buffer in the scanner can hold as approximately many as 1290555 scans based on EAN-13 barcodes.
‘\’ in front of the byte. Click “Genarate” to get the setting barcode C. Use MS840P to scan the setting code to complete the setting process. For example the following will add a preamble of “Cursor Down” (0x9D) and “ABC”...
Need help?
Do you have a question about the MS840P and is the answer not in the manual?
Questions and answers