Oceanled OceanBridge Quick Install Manual

PRODUCT CODE: 013201
OceanBridge
M U L T I Z O N E L I G H T I N G C O N T R O L L E R
Quick Install Guide
For the full instructions, scan
the QR code below:
FULL INSTALL MANUAL
Expandable Touch
System interface
The OceanBridge is a patented multizone lighting controller, designed specifically for
easy control of all your boat's lights from an MFD, smartphone, or tablet. This innovative
system allows you complete control of the entire OceanLED range of lights and accessories,
as well as most third-party (DMX or on/off) DC-powered lights. The OceanBridge gives
you complete control, of colour change, music sync, colour fade, colour transitions,
brightness, zone creation, and our patented movement-to-colour functionality.
TECHNICAL INFORMATION:
Water Protection
IP66
Rating
Power
6W (500mA @12V DC)
Consumption
NMEA2000 Bus Powered LEN = 10
Operating 12/24V DC (Max 32V DC)
Voltage
Power Input
NMEA2000 Connector Port
Wi-Fi
Built-In
External Switch
Supports Four External Switch Inputs
Inputs
USB Connectivity 1 x USB port (Memory stick only)
Ocean LED Marine LTD / Tel +44 (0) 1455 637505 / sales@oceanled.com
To register your product
and receive notifications
for software upgrades, scan
the QR code below:
PRODUCT REGISTRATION
10 Dynamic Universal
Scenes Compatibility
Specifications are subject to change without notice.
Warranty Serial Code:
Colour 10 Lighting
Control Zones
Bluetooth
Built-In
Material
Robust Polycarbonate
On-board Sensors Gyroscope/Accelometer Sensor
Thermal Sensor
Operating
-10°C to 50°C ambient
Temperature
Network
NMEA2000 connection
Connections
Ethernet connection
Audio
1 x Audio-In 3.5mm
1 x Audio-Out 3.5mm
DMX / RDM 1 x DMX512-A Input
(RS485 Interface)
1 x DMX512-A Input / Output
Ocean LED USA LLC / Tel +1 954 523 2250 / sales@oceanledusa.com /
PRODUCT CODE: 013201
Dynamic Wave Motion
Audio Mode Mode
www.oceanled.com