Kia Niro Plus DE 2022 Owner's Manual page 247

Driving your vehicle
2. Push the switch down (to SET-).
ODEPV052050
3. Push the switch up (to RES+) or down
(to SET-), and release it at the desired
speed. Push the switch up (to RES+)
or down (to SET-) and hold it. The
speed will increase or decrease by 5
km/h (3 mph).
ODEPV052049
Push the switch up (to RES+) or down
(SET-) and release it immediately.
The speed will increase or decrease by 1
km/h. The set speed limit will display on
the instrument cluster.
ODEPPH052038L
The set speed limit will be displayed. To
drive over the preset speed limit you
must depress hard on the accelerator
pedal (more than approximately 80%)
until the kickdown mechanism (if
equipped) works with a clicking noise.
Then the set speed limit will blink and
chime will sound until you return the
vehicle speed within the speed limit.
Manual Speed Limit Assist (MSLA)
NOTICE
僅 Depressing the accelerator pedal less
than approximately 50%, the vehicle
will not speed over the preset speed
limit but maintain the vehicle speed
within the speed limit.
僅 A clicking noise heard from the kick
down mechanism by depressing the
accelerator pedal fully is a normal
condition.
Temporarily pausing Manual
Speed Limit Assist
ODEPPH052074L
Press the ( ) switch to temporarily
pause the set speed limit. The set speed
limit will turn off but the Speed Limit
( ) indicator will stay on.
Resuming Manual Speed Limit
Assist
ODEPPH052075L_3
To resume Manual Speed Limit Assist
after the function was paused, operate
the (+), (-), ( ) switch.
If you push the (+) switch up or (–)
switch down, vehicle speed will be set to
the current speed on the cluster.
6
6 59