Table of Contents
Advertisement
ITroubleshooting
Symptom
Possible causes and remedies
Poor or no picture (screen not lit), good sound
Good picture, no sound
No picture (screen not lit), no sound
• Adjust PICTURE.
• Adjust BRIGHTNESS.
• Check antennalcable
connections.
• Press VOLUME
+ on the TV or VOL + on the Remote
Commander.
• Press MUTING on the Remote Commander.
• Check that the MTS button is set correctly.
• Check that the TVIVIDEO
button is set correctly.
• Check that "SPEAKER
ON" is set.
• Is POWER switched on?
• Plug the unit into a wall outlet.
No color
Snow and noise only
• Check that the TVIVIDEO
button is set correctly.
• Is it a color program?
• AdjustCOLOR.
• Is it an active or the correct channel?
• Check the CABLE setting.
• Check antennalcable
connections.
Dotted lines or stripes
Double Images or ghosts
This is often caused by local interference. (e.g. cars, neon signs,
hairdryers etc.) Adjust the antenna for minimum interference.
Reflectionsfrom nearby mountainsor buildingsoften cause this
problem.A highlydirectionaloutdoorantennaor a CATV cable
may improvethe picture.
P
Try another channel.
It could be station trouble.
If the problem persists, contact your nearest service facility.
Sony Corporation
Printed in U.S.A.
Advertisement
Table of Contents
