Sony Trinitron KV-27TS27 Operating Instructions Manual page 15

| Presetting TV Channels
TVIVIDEO POWER
Press POWER on the TV or the Remote Commanderto turn the TV on.
POWER
©
POWER
SWAP PORTION PIP
At/TOI_T_M CHGI.X4_ TV/VIDrco
®®®
®®®
N
iUIU
RESETA/V_t_0OWMENU
C_ _mCZ)
EXIT _ ENTER
II • TV/V'I'R
C_ c_ c_
<N b- I_
C_ C_ cz)
REC
_--e--_
IW-¥'I02
RM-Y102
POWER
TV/VIDEO
AUTO PGM
CH +/-
Turn the cable connection on or off, depending on if you want to preset cable or VHF/UHF channels.
(FOLLOW THE STEPS ON P. 14)
/f "VIDEO" or "S VIDEO" is displayed on the screen, press the TVIWDEO button on
the TV Or the Remote Commander so that a channel number appears.
3
Press AUTO PGM.
AUTO PGM
"AUTO PROGRAM" is displayed on the screen and receivable channels (other than the
channels already preset) will be preset in numerical sequence. The channels previously
preset remain in the TV's memory.
When no more channels can be found, the programming stops and the lowest numbered
channel is displayed.
4
Press CH + I- to check or view preset channels.
Channels that can be received on this TV:
VHF: 2 -- 13
UHF: 14 -- 69
Cable: 1 -- 125
To erase unnecessary channels, or to add channels that could not be
preset automatically because their signal strength was too weak, follow the
steps in "Erasing Unnecessary Channels" (p. 16) and "Presetting Only
Desired Channels" (p. 18).
=B .,4,
=3
_Q
O
=l
=.
s_
O.+.e,,: _,°p 15