Install The Muvpn Client - Watchguard Firebox SOHO 6 Client Manual

13 Under the "WINS addresses, in order of use" heading, click the Add
14 Enter your WINS server IP address in the appropriate field, then click
15 Click the OK button to close the Advanced TCP/IP Settings window.
16 Click the OK button to close the Internet Protocol (TCP/IP) Properties
17 Click the OK button to close the next window.
18 Click the Cancel button again to close the Dial-up connection

Install the MUVPN Client

Install the SOHO 6 MUVPN client software on each remote computer.
The MUVPN installation files are available at the WatchGuard Web site:
The installation process consists of two parts: installing the client software
on the remote computer and configuring the client.
In order to perform the installation process successfully, you
the remote computer with local administrator rights.
Follow these steps to install the client:
1
2
3
MUVPN Client Guide
button.
The TCP/IP WINS Server window appears.
the Add button.
If you have multiple remote WINS servers repeat the last two steps.
window.
window.
http://www.watchguard.com/support
Copy the MUVPN installation file to the remote computer.
Double-click the MUVPN installation file.
If at any time during the installation process you inadvertently skip a step, simply
cancel the process and begin again.
The installation welcomes you to the InstallShield Wizard. Click the
Next button.
During the Setup Status portion of the install procedure, the InstallShield may
detect ReadOnly Files. If this occurs, click Yes for each event in order to continue
the install.
Install the MUVPN Client
N
OTE
must
log into
17