Watchguard Firebox SOHO 6 Client Manual page 14

CHAPTER 1: Configure the SOHO 6
4
5
6
7
8
9
10 Enable the All traffic uses tunnel (0.0.0.0/0 Subnet) checkbox to force
11 Click the Submit button.
4
The Edit MUVPN Client page appears.
Enter a Username in the appropriate field.
This Username will be used as the E-mail Address when setting up the MUVPN
client. In our example, Helmdog.
Enter a Passphrase in the appropriate field.
This passphrase will be used as the Pre-Shared Key when setting up the MUVPN
client. In our example, pL4n3phr34k
Enter the Virtual IP address which will be used by the MUVPN
computer when connecting to the SOHO 6 in the appropriate field.
In our example, 192.168.111.4.
Select the Authentication Algorithm.
In our example, SHA1-HMAC.
Select the Encryption Algorithm.
In our example, 3DECS-CBC.
From the VPN Client Type drop list, select Moible User.
all traffic from the MUVPN client to go through VPNforce IPSec
tunnel.
MUVPN Client