Watchguard Firebox SOHO 6 Client Manual page 20

CHAPTER 2: Preparation, Installation, and Connection
5
6
7
If there is no modem installed, you can enable the Don't detect my modem;
I will select it from a list checkbox then add a Standard 28800 modem.
Windows NT requires at least one RAS device such as a modem if the
RAS component is installed. If no modems are available, a dial-up
networking, serial cable between two computers can be selected.
8
9
10 Reboot your computer.
Configuring the WINS and DNS settings
You must configure the remote computer to use the WINS and DNS
servers of the trusted network behind the Firebox.
From the Windows desktop:
1
2
3
4
5
6
10
Enter the path to the Windows NT install files or insert your system
installation CD, then click the OK button.
The Remote Access Setup dialog box appears.
Click the Yes button to add a RAS capable device and enable you to
add a modem.
Click the Add button and complete the Install New Modem wizard.
Select the modem added in the last step in the Add RAS Device dialog
box, then click the OK button.
Click the Continue button, then click the Close button.
Select Start = > Settings = > Control Panel. Double-click the Network
icon.
The Network window appears.
Click the Protocols tab.
Select the TCP/IP protocol and click the Properties button.
The Microsoft TCP/IP Properties window appears.
Click the DNS tab.
Click the Add button.
Enter your DNS server IP address in the appropriate field.
If you have multiple remote DNS servers repeat the previous three steps.
N
OTE
MUVPN Client