Frontpanel C Ontrols - Harman Kardon AVR 220 Owner's Manual

Front Panel Controls
E!
[] Main PowerSwitch [] Input SourceSelector [] SetButton
[] SystemPowerControl [] FM Mode Selector [] Input Indicators
[] PowerIndicatoc [] DigitalOptical 3 Input [] Delay
[] Headphone Jack [] DigitalCoax3 Jack [] DigitalInput Selector
[] SelectorButtons [] Video 4 VideoInput Jacks [] Main InformationDisplay,
[] ToneMode [] Video 4 Audio Input Jacks [] ChannelSelectButton
[] SurroundMode Selector [] BassControl [] Speaker SelectButton
[] TuningSelector [] BalanceControl [] TestToneSelector
[] TunerBandSelector [] TrebleControl [] SurrouncMode Indicators
[] PresetStationsSelector [] Volume Control [] RemoteSensor W indow
[] Main Power Switch: Pressthis button to [] surroundingthe switchwill turn green
apply power to the AVR220. When the switch when the unit is on.
is pressedin, the unit is alacedin a Standby []
mode,as indicated by the amber LED[] sur- Power Indicator: This LEDwill be illumi-
rounding the System Power Control [].
This button MUST be pressed in to operate the
unit. To turn the unit off and prevent the use
of the remote control, this switch should be
pressed until it pops out from the front 3anel
so that the word "OFF" may be read at the
top of the switch.
NOTE:Thisswitchis normallyleft in the "ON"
position.
[] System Power Control: Whenthe Main
hated in amberwhen the unit is in the Standby
modeto sicnal that the unit is readyto be
turned on. When the unit is in operation,the
indicatorwill turn green.Shouldthe indicator
turn red,turn the unit off using the Main
Power Switch [] and checkthe speakerwire
connections to makecertainthat thereare no
shortcircuits.
[] HeadphoneJack:Thisjack maybe usedto
listento the AVR220'soutputthrough a pair of
headphones. Becertainthat the headphones
Power Switch [] is "ON," pressthis button havea standard1/4" stereophoneplug.Note
to turn on the AVR220; pressit againto turn that the mainroomspeakers will automatically
the unit off Note that the Power Indicator be turnedoff when the headphone jack isin use.
[] Selector Buttons:Whenyou areestablish-
ingthe AVR220'sconfiguration settings, u se
thesebuttonsto selectfrom the choicesavailable,
asshowninthe Main Information DisplayF,[_l.
[] Tone Mode: _ressing this button enables
or disablesthe BassandTrebletone controls.
When the button is pressedsothat the words
TONEIN appearin the Main Information
Display E_, the settingsof the Bass[] and
Treble [] controlsmay be usedto ac ustthe
output signals. W hen the button is pressed so
that the words TONE OUTappearin the Main
Information Display I_E_, the output signal
will be "flat," without any bassor treble alter-
ation, no matterhowthe actua Bassand
Treble Controls []i"[_ areadjusted
5 FRONT PANELCONTROLS