Rinnai RHFE-1004FA Owners & Installation Manual page 54

• TYPES COMPATIBLE WITH EXTENSION SET
RHFE-1004FA
INSTALLING AN EXTENSION KIT
Installing an extension kit requires construction of an air line and the exhaust line. The air line is connected
between the Air Suppty Elbow at the rear of the heater and the air inlet port on the Flue pipe.
Similarly, the exhaust line is connected between the joint pipe at the rear of the heater, and the exhaust
port on the Flue pipe.
Caution: Check to see there is no debris in pipe or hose.
• HOW TO INSTALL
MODEL:RHFE-1004FA
Example:Using 2 sets of extension set and 1 bent set. Example:Using 80 inches slide pipe set.
PIPE STOPPER A'
FLUE ADAPTOR
(COMES WITH MAIN UNIT)
PIPE STOPPER A
PIPE STOPPER B
EXHAUST PIPE
PIPE CLAMP
VENT MANIFOLD
(COMES WITH MAIN UNIT)
AIR INTAKE ELBOW
(COMES WITH MAIN UNIT)
\
FLUE ADAPTOR
(COMES WITH MAIN UNIT
PIPE STOPPER A
(COMES WITH POT- I15)
BENT ELBOW
(COMES W1TH FOT-115)
PIPE CLAMP
PIPE CLAMP
PIPE CLAMP
(
PIPE STOPPER A"
PIPE STOPPER A
-_PIPE STOPPER B
"_ PIPE STOPPER A
HOSE JOINT
_UST
PIPE
PIPE STOPPER A
PIPE STOPPER E
PIPE CLAMP
HOSE JOINT _
40 INCH
STRAIGHT PIPE
PIPE STOPPER A
PIPE STOPPER E
AIR INTAKE HOSE
AIR INTAKE HOSE
- 52 -