Rinnai RHFE-1004FA Owners & Installation Manual page 30

Energysaver gas direct vent wall furnace
Hide thumbs Also See for RHFE-1004FA:
Table of Contents

Advertisement

Beforethe ColdSeasonBegins
Check the air supply/exhaust connection.
Before using this heater, inspect the air supply/exhaust connection to make sure the pipe is not
disconnected or bent.
Check the main unit and the air supply/exhaust.
Make sure there is no combustible or flammable material near the main unit or the air
supply/exhaust.
CAUTION:
If you find a problem with the air supply/exhaust do not use the unit. Contact your dealer or the nearest
Rinnai office.
Function Lock
The Function lock feature prevents accidents due to tampering by small children.
Press both"/k" and %/" button at the same time.
The "Function Lock" lamp should comes on and engage the function lock.
Cancelling the Function lock.
Press both=A" and %/" button again and hold for two (2) seconds.
This will disengage the function lock.
Note:
If the Function lock is engaged while the unit is operating, all operations by switches and buttons will be
disabled except tuming the unit off.
If the Function lock is engaged while the unit is off, all operation will be disabled. When you turn the unit
on and the Function lock is engaged you must cancel the Function lock before preceding.
AIR FLOW CONTROL:
The direction of air flow may be changed to the
left or right.
Use a screwdriver or a similar object to change
the direction of the verticaE
louver.
CAUTION:
DO not adjust repeatedly (more than 5-6 times), as it
may cause the louver to break.
The hodzontal louver (which determines the vertical
air flow direction) is fixed and cannot be adjusted.
Do not adjust the air flow direction while warm air is
flowing, as it may cause bum injury.
Irb
Sensible Temperature
Control:
The sensible temperature control feature enables comfortable heating which matches the conditions in
the room.
Based on the information collected by the room temperature thermistor when the heating starts,
the heating capacity is automatically adjusted to achieve a comfortable heating effect and to
reach the set room temperature quickly.
- 28 -

Advertisement

Table of Contents
loading

Table of Contents