List Mode - Holzworth Instrumentation HSM Series Quick Start Operation Manual

LIST MODE

List mode allows for up to 3201 points (command lines) to be stored and each command line
allows for modification of any or all the following parameters: frequency, amplitude, and dwell
time between points.
Wide List and Narrow List modes use identical load commands with limitations in the narrow
list settings listed in the web datasheet: https://holzworth.com/products/rf-synthesizer-modules.
Selecting either list button will initiate a popup window represented in the illustration below.
The list can be edited in the GUI window, or outside the software program in a text editor
application.
NOTE: The recall factory preset does not include either list mode, and a CSV list must be
created by the end user.
Examples of wide and narrow band list files are stored in the HSM module directory of the main
Holzworth directory. These files can be created and modified to change the RF signal output.
HSM Series Quick Start Guide holzworth.com 10