Advertisement
Quick Links
0549750/6
IM-P054-08
CTLS Issue 6
MPC1, MPC2 and MPC2A
High Efficiency Compressed Air Filter/Regulators
Installation and Maintenance Instructions
MPC1, MPC2 and MPC2A High Efficiency Compressed Air Filter/Regulators
© Copyright 2023
1
IM-P054-08 CTLS Issue 6
Printed in GB
Advertisement
Related Manuals for Spirax Sarco MPC1
Summary of Contents for Spirax Sarco MPC1
-
Page 1: Table Of Contents
Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation and commissioning 4. Operation 5. Spare parts 6. Maintenance MPC1, MPC2 and MPC2A High Efficiency Compressed Air Filter/Regulators © Copyright 2023 IM-P054-08 CTLS Issue 6 Printed in GB... -
Page 2: Safety Information
Determine the correct installation situation and direction of fluid flow. iv) Spirax Sarco products are not intended to withstand external stresses that may be induced by any system to which they are fitted. It is the responsibility of the installer to consider these stresses and take adequate precautions to minimise them. - Page 3 You are advised to assess the risks taking into account the task, the individual, the load and the working environment and use the appropriate handling method depending on the circumstances of the work being done. MPC1, MPC2 and MPC2A High Efficiency Compressed Air Filter/Regulators IM-P054-08 CTLS Issue 6...
- Page 4 Where no additional information is provided on the Spirax Sarco product compliance web page, this product may be safely recycled and/or disposed providing due care is taken. Always check your local recycling and disposal regulations.
-
Page 5: General Product Information
MPC2 and MPC2A airsets. 2.2 Sizes and pipe connections ¼" screwed BSP (BS 21-Rp, ISO 7) MPC1, MPC2 and MPC2A High Efficiency Compressed Air Filter/Regulators IM-P054-08 CTLS Issue 6... - Page 6 Polycarbonate or aluminium alloy Bonnet assembly Polycarbonate or alluminium Filter element Microfibre/stainless steel Valve Nitrile MPC2 shown with optional pressure gauge Fig. 1 MPC2 high efficiency compressed air filter/regulator MPC1, MPC2 and MPC2A High Efficiency Compressed Air Filter/Regulators IM-P054-08 CTLS Issue 6...
-
Page 7: Installation And Commissioning
3.2.2 FK21 fixing kit The FK21 fixing kit is required to mount the MPC2 onto the Spirax Sarco range of PN pneumatic actuators. The fixing kit and aluminium mounting ring are optional extras and must also be specified when placing an order. - Page 8 3.3.7 The polycarbonate bowl may be fitted with a bowl guard, or replaced with a metal bowl. MPC1, MPC2 and MPC2A High Efficiency Compressed Air Filter/Regulators IM-P054-08 CTLS Issue 6...
- Page 9 There will be a slight increase in set pressure when the flow stops. Tamper-proof cap Fig. 5 Adjustment MPC1, MPC2 and MPC2A High Efficiency Compressed Air Filter/Regulators IM-P054-08 CTLS Issue 6...
-
Page 10: Operation
Do not exceed the maximum flowrate (for any given pressure) as shown in Section 4.3 or there is every chance that some of the coalesced liquids will be re-entrained and carried on downstream. MPC1, MPC2 and MPC2A High Efficiency Compressed Air Filter/Regulators IM-P054-08 CTLS Issue 6... - Page 11 Optional extra Tamper-proof cap Optional extra 18 Stainless steel screen Chemically resistant foam sock Boroscilicate microfibre Support medium Fig. 6 Operation MPC1, MPC2 and MPC2A High Efficiency Compressed Air Filter/Regulators IM-P054-08 CTLS Issue 6...
- Page 12 4.3 Maximum secondary flow at peak performance Air flow scfm Air flow dm3/s Use of the product in this region may reduce the oil removing efficiency. MPC1, MPC2 and MPC2A High Efficiency Compressed Air Filter/Regulators IM-P054-08 CTLS Issue 6...
-
Page 13: Spare Parts
Example: 1 - Element and 'O' ring set for a MPC2 high ef f iciency Fig. 7 Spares and optional extras compressed air filter/regulator. MPC1, MPC2 and MPC2A High Efficiency Compressed Air Filter/Regulators IM-P054-08 CTLS Issue 6... -
Page 14: Maintenance
Reassemble in reverse order, ensuring that the element 'O' ring (4) is fitted. The bowl should be firmly hand tightened. b a r 0 0 0 0 0 0 0 0 Fig. 8 MPC1, MPC2 and MPC2A High Efficiency Compressed Air Filter/Regulators IM-P054-08 CTLS Issue 6... - Page 15 MPC1, MPC2 and MPC2A High Efficiency Compressed Air Filter/Regulators IM-P054-08 CTLS Issue 6...
- Page 16 MPC1, MPC2 and MPC2A High Efficiency Compressed Air Filter/Regulators IM-P054-08 CTLS Issue 6...
Need help?
Do you have a question about the MPC1 and is the answer not in the manual?
Questions and answers