Table of Contents
Advertisement
FocusCube v3
COMMAND SOCKET VIA TCP PORT
FocusCube v3 spawns TCP port number 9999 and accepts the same command set like USB serial port.
The only difference is that you need to provide the access point password before any interaction with the device.
In the below example, we send the default password "12345678" and receive an AUTHOK reply.
After that, we can communicate and control the device. In case the password is wrong the FocusCube v3 will
close the connection.
For the complete command set please check the FocusCube v3 product page at the PegasusAstro website.
STANDALONE OPERATION
The FocusCube v3 is engineered for convenient standalone operation right out of the box. With a simple USB-C
cable connection setup and the Wi-Fi hotspot functionality already enabled by default, your preferred settings are
ready for immediate use each time you power up the device.
Page 18 of 20
Pegasus Astro – FocusCube v3
Advertisement
Table of Contents
