FocusCube v3
USB CONNECTIVITY
The unit requires USB2 signaling and features a USB Type-C port, designed to seamlessly accommodate the
included 1.5-meter USB-C cable, ensuring a hassle-free setup right out of the box.
Additionally, the same USB cable serves a dual purpose by not only connecting the FocusCube v3 but also
supplying power to the device. It delivers a robust current of up to 900mA to the stepper motor, ensuring efficient
and reliable operation.
It is strongly recommended to limit the maximum USB2 cable length to 5 meters. Adhering to this guideline
ensures optimal data transmission rates and minimizes the potential for signal degradation over longer distances,
thereby promoting stable and reliable USB2 connectivity for your device.
While USB extenders may function on a case-by-case basis, it is important to note that we cannot provide a
guarantee of compatibility or performance with third-party devices. The efficacy of such extenders can vary
depending on numerous factors, and users should exercise caution and conduct their own testing when integrating
third-party USB extenders with our products.
TEMPERATURE SENSOR
The external probe serves as a temperature measurement device seamlessly integrated with the controller. It is
equipped with a 0.6m cable featuring a 3.5mm / mini stereo jack. Capable of measuring temperatures ranging
from -55°C to +125°C, the probe exhibits an accuracy of ±0.5°C within the temperature range of -10°C to +85°C.
Page 11 of 20
Pegasus Astro – FocusCube v3