Table of Contents
Advertisement
OPERATION
I. Initial Connection:
1.
USB Cable: Carefully insert the USB type C cable into the designated port on the FocusCube v3 and
connect the other end to your computer.
II. Device Boot-up:
3. Upon connecting the USB-C cable, the device will commence its boot sequence. Observe the LED
indicator, which will perform three rapid blinks before transitioning to a steady, solid red illumination.
This confirms the successful loading of firmware and signifies that the device is now in full operational
mode.
III. Software Installation:
5. To establish communication with the device, please visit our official website at pegasusastro.com.
Download the Unity software package from
requisite ASCOM driver, to facilitate connectivity with the FocusCube v3. You can also connect the
device with ASCOM Alpaca. Check ASCOM Alpaca section in this manual.
MOTOR TYPE
The FocusCube v3 is equipped with a high-resolution geared stepper motor featuring a Step Angle of 7.5 degrees
and a Gearbox Reduction Rate of 120 (resulting in an impressive 0.06255 degrees per step). This gearbox ensures
minimal backlash and delivers exceptional torque, making it perfectly suited for achieving micron-scale precision
in focusing applications.
FocusCube v3 controller drives the stepper motor at full step.
➢
WARNING: DO NOT ATTEMPT MANUAL MOVEMENT OF THE MOTOR WITHOUT POWER.
The motor functions as a brake, and attempting rotation without power may result in damage of the
internal gearbox.
UNIVERSAL BRACKET
Our versatile Universal bracket features custom-made holes and rails, designed to ensure seamless integration
with any telescope system.
Whether you have a refractor, reflector, or any other telescope type, the FocusCube 3's bracket can be effortlessly
adjusted to meet your exact needs.
Use the provided screws and washers to attach the bracket on your telescope focuser.
FocusCube v3
https://pegasusastro.com/download/,
Page 10 of 20
Pegasus Astro – FocusCube v3
which includes the
Advertisement
Table of Contents
