Digital Controller Operation - Oliver 5240 Owner's Manual

Operating the Double Side Jointing Planer
5.1

Digital Controller Operation

Run / Error Indicator
This indicator light will illuminate a steady yellow when the table is moving up or down. This light will blink if there is an
error of any sort. The indicator light is currently unlit.
Keypad
The keypad is used to input set values (the operator' s desired thickness setting). The up and down arrows can be used to
move the table up or down without keying in an exact numerical thickness value.
Present Value (PV) Readout
This LED readout displays the current thickness setting of the machine. The readout currently displays a value of 31.3.
Set Value Readout (SV)
This LED readout displays the value input by the operator on the keypad. The readout currently displays a value of 31.3.
Units Indicator
The digital thickness controls are capable of operating and displaying in either inches or millimeters. The controller is
currently displaying information in millimeters.
Function Buttons
Four function buttons are available to the user: SET, STOP/CLEAR, UNITS, and RUN. The use of these buttons is
detailed in the following sections.
Oliver 5240 Owner's Manual
13