Table of Contents
Advertisement
New device Setup via the PAL Portal
Sign into the PAL Portal and you will see the homepage. Click on "Devices" and on
1)
the + button to add a new device
This will open a window (below) where you are
2)
asked to enter the Serial number of the device.
This number will begin with 4G followed by 9
digits and can be found on the sticker on the
PAL packaging or on the back of the device.
After you enter the Serial # you will be asked
3)
to enter a code. The code is a 5-digit number
shown on the back of the PAL Device
Next you will enter the address of the new
4)
device. This can be as simple s a city and
state or can be an exact street address. The
name is what the account administrator will
name the device and Output 1 is the name of
the device the PAL unit will be controlling.
CLICK THE SAVE BUTTON ONCE THIS
INFORMATION HAS BEEN ENTERED
5)
Once the information has been saved, you
will see this screen, indicating the device
has been successfully added
SPIDER CONTROLLERS
2480 South 3850 West, Suite B , Salt Lake City, UT 84120
(866) 975-0101 • (866) 975-0404 fax sales@transmittersolutions.com
9
Advertisement
Table of Contents
