Asus AAEON UP Xtreme 7100 Edge User Manual page 24

Pin Signal
5 GPIO5
GND
GPIO Voltage Level
The controller provides a jumper to change the GPIO voltage level. The default is 3.3V
(pin 1-2).
To change GPIO voltage settings, please remove chassis and allocate jumper base on
following table
Pin Signal
1 V3P3_GPIO
3 V5_GPIO
5 V12_GPIO
Chapter 2 – Hardware Information
Pin Signal
6 GPIO6
GND
Pin Signal
2 VGPIO
4 VGPIO
6 VGPIO
13