Safety Guide - FOS Technologies Ares Profile User Manual

1. SAFETY GUIDE

Please read this manual carefully, it includes Important information
such as installation, use and maintenance.
PAY ATTENTION
Please save this manual as a basis for future consultation, if you sell this
product to other users, please make sure they also get this manual.
Notice：
The equipment is well-packaged when shipped from the factory. Please
follow the user manual for operation. Human failures are not covered by
the warranty.
●Before using, please open it and check carefully to ensure that there is
no damage caused by transportation.
●This lamp is only suitable for indoor dry place.
●The installation and operation of lamps should be carried out by
professionals.
●Do not let children operate the machine.
●Use safety ropes when fixing the device, and hold the bottom when
moving the lamp.
●The equipment must be installed in a well-ventilated place, at least 50
cm from the adjacent surface.
●Make sure the ventilation holes are unobstructed to avoid overheating
when the lamp is running.
●Before operation, ensure that the power supply voltage matches the
equipment.
●Please ground the conductor to prevent electric shock.
●Do not operate the lamp in an environment above 40℃.
●It is forbidden to connect the lamp directly to the dimming equipment.
●A small amount of smoke or odor may appear when the new lamp works,
and it will disappear after 15 minutes of operation.
●Do not place combustible objects beside the lamps during operation.
1