FOS Technologies Ares Profile User Manual page 13

3.2.1.3 DMX State
Press DMX State，press ENTER to confirm it. DMX State Blackout
/Hold show on the LCD. Press MENU for going back to previous menu, or
wait for 1 minute for going back to main menu.
3.2.1.4 View DMX Value
Press View DMX Value, press ENTER to confirm it. DMX Value
shows on the LCD. Press UP/DOWN to choose View DMX Value. Press
ENTER to reserve. Press MENU for going back to previous menu, or wait
for 1 minute for going back to main menu.
3.2.2 SET
Press MENU to choose SET Press ENTER to confirm it. Press
UP/DOWN to choose： Pan Inverse, Tilt Inverse, P/T Feedback, Dimmer
Curve, Dimmer Speed, Fan Mode.
3.2.2.1 Pan Inverse
Press Pan Inverse, press ENTER to confirm it. Pan Inverse shows
on the LCD. Press UP/DOWN to choose ： No(Normal) or Yes(Pan
Inverse), Press ENTER to reserve. Press MENU for going back to
previous menu, or wait for 1 minute for going back to main menu.
3.2.2.2 Tilt Inverse
Press Tilt Inverse, press ENTER to confirm it. Tilt Inverse shows on
the LCD. Press UP/DOWN to choose：No(Normal) or Yes(Tilt Inverse),
Press ENTER to reserve. Press MENU for going back to previous menu,
or wait for 1 minutes for going back to main menu.
3.2.2.3 X/Y P/T Feedback
Press P/T Feedback, press ENTER to confirm it. P/T Feedback
shows on the LCD. Press UP/DOWN to choose：No(P/T Forever or
Yes(P/T Feedback). Press ENTER to reserve. Press MENU for going
back to previous menu, or wait for 1 minute for going back to main menu.
3.2.2.4 Dimmer Curve
Press Dimmer Curve, press ENTER to confirm it. Press UP/DOWN
to choose：Liner, Square law, Inv SQ law or S Curve. Press ENTER to
reserve. Press MENU for going back to previous menu, or wait for 1 minute
for going back to main menu.
1