Table of Contents
Advertisement
Daily maintenance and cleaning
• General maintenance
Do not leave the instrument in a place exposed to sunlight for a long time. If it is
not used for a long time, please store it in a cool, dry place.
• Be careful
Do not allow any corrosive liquid to stick to the instrument to avoid damage to
the instrument.
• Clean
Please clean the instrument frequently according to usage. Methods as below:
·
Disconnect the power supply and turn off the instrument.
·
Use a damp but non-drip soft cloth (you can use mild detergent or clean water) to
wipe the dust on the outside of the instrument.
·
Neutral computer cleaning paste can also be used to wipe dust from the outside
of the instrument.
·
Use a soft cloth or absorbent cotton dipped in absolute alcohol to wipe the
outside of the instrument, ports, connectors, etc.
WARNING
Before re-powering on, please make sure the instrument is
completely dry to avoid short circuiting the instrument or even
personal injury due to moisture.
SMR Series Monitoring Receiver Module Quick Start Manual
3 / 11
Advertisement
Table of Contents
