Advertisement
TROUBLESHOOTING
electrical appliances being used.
SYMPTOM
|
CAUSE
REMEDY
Disc table is not ejected
When STOP/OPEN button is
pressed.
Disc table comes out.
@ Power cord is not properly plugged into AC
wall socket.
e@ Power switch is not. turned on.
@ Plug in power cord.
e Turn on power switch.
e Disc is dirty.
e The disc is not properly set on the disc table.
@ Moisture has condensed on parts in the player.
@ Disc is warped.
@ Refer to instructions under "Remedy",
item 9,
and clean disc.
@ Set the disc properly.
e Remove disc and let player stand for 1 to 2 hours
until it is dry.
e Correct the disc.
(Refer to Symptom 9, remedy column.)
|
Slanting stripes appear on the
TV screen when TV/LDP
button is pressed to receive
TV broadcasts.
Remote control does not
work,
Operation of the remote
contro! unit causes the TV to
operate improperly.
@ Antenna cable has not been connected.
e TV indicator does not light.
e Electric field for TV broadcasting is weak.
(This does not indicate any trouble.)
e@ Remote control unit batteries are weak.
@ There is an obstacle between the player and
the remote control unit.
@ Connect VHF antenna cable to antenna terminal
on the player.
e Turn off the power switch of the player.
We recommend that you turn off the power
switch of the player, whenever you intend to
watch TV for a long time.
e Remove the connector plug.
@ Replace batteries.
e@ Remove the obstacle or shift the remote control
position.
@ Operate the remote control unit in front of the
@ Some TV sets have remote control functions that
operate improperly in response to the remote
control unit of the player.
@ Move the TV and the player further apart, or
cover the remote sensor of the TV during disc
playback.
51
<VRB1016>
snocstsnra
STG
SERED
EREE
sess
= a
. "
SF
EET RSS
ETS
STE
SA ST
ETT
EN TR
SR IE ET TE
TST
TOE
SATIS
EL TT SEES
ETE
TIE
ITE,
SRNR
SPARE
8
SS TE
RN HORST
Advertisement
