Download Print this page

Pioneer CLD-3070 Operating Instructions Manual page 2

Cd cdv ld player
Hide thumbs Also See for CLD-3070:

Advertisement

IMPORTANT
The
fightning
flash
with
arrowhead,
within
an
equilateral triangle, is intended to alert the user of the
presence of uninsulated "'dangerous voltage" within the
product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
READ
INSTRUCTIONS
— All
the
safety
and
operating instructions should be read before the
appliance is operated.
RETAIN
INSTRUCTIONS
— The
safety
and
operating instructions should be retained for future
reference.
HEED WARNINGS
All warnings on the appliance
and in the operating instructions should be adhered
to.
FOLLOW
INSTRUCTIONS
— All
operating
and
use instructions should be followed.
CLEANING
— Unplug this video product from the
wall outlet before cleaning.
Do not use fiquid
cleaners or aerosol cleaners. Use a damp cloth for
cleaning.
ATTACHMENTS
Do
not
use
attachments
not
recommended by the video product manufacturer
as they may cause hazards.
WATER AND MOISTURE
— Do not use this video
product near water — for example, near a bathtub,
wash bowl, kitchen sink, or laundry tub, in a wet
basement, or near a swimming pool, and the like.
ACCESSORIES
— Do not place this video product
on an unstable cart, stand, tripod, bracket, or
table. The video product may fall, causing serious
injury to a child or adult, and serious damage to the
appliance. Use only with a cart, stand, tripod,
bracket, or table recommended by the manufac-
turer, of sold with the video product. Any mount-
ing of the appliance should follow the manufac-
turer's instructions, and should use a mounting ac-
cessory recommended by the manufacturer.
CART — An apptiance and cart combination should be
moved with care. Quick stops, excessive force, and
uneven surfaces may cause the appliance and cart
combination to overturn.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO PREVENT
THE RISK OF ELECTRIC SHOCK, DO
NOT
REMOVE
COVER
(OR BACK).
NO
USER-
SERVICEABLE
PARTS
INSIDE. REFER
SERVIC-
ING TO QUALIFIED SERVICE PERSONNEL.
SAFETY INSTRUCTIONS
POLARIZATION
— This video product is equipped
with a polarized alternating current line plug (a plug
having one blade wider than the other}. This plug
will fit into the power outlet only one way. This is a
safety feature. If you are unable to insert the plug
fully into the outlet, try reversing the plug. If the
plug should still fail to fit, contact your electrician
to replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
POWER-CORD PROTECTION
- Power-supply cords should be routed so that they
are not likely to be walked on or pinched by items
placed upon or against them, paying particular at-
tention to cords at plugs, convenience receptacles,
and the point where they exit from the appliance.
LIGHTNING
For added protection for this video
product receiver during a lightning storm, or when
it is feft unattended and unused for long periods of
time, unplug it from the wall outlet and disconnect
the antenna or cable system.
This will prevent
damage to the video product due to lightning and
power-line surges.
POWER LINES
An outside antenna system should
not be located in the vicinity of overhead power
lines or other electric light or power circuits, or
where it can fall into such power lines or circuits.
When installing an outside antenna system, ex-
treme care should be taken to keep from touching
such power lines or circuits as contact with them
might be fatal.
OVERLOADING
— Do not overload wall outlets and
extension cords as this can result in the risk of fire
or electric shock.
OBJECT
AND
LIQUID
ENTRY
— Never
push
objects of any kind into this video product through
openings as they may touch dangerous voltage
points or short-out parts that could result in a fire or
electric shock. Never spill liquid of any kind on the
video product.
VENTILATION
Slots and openings in the cabinet
are provided for ventilation and to ensure reliable
operation of the video product and to protect it
from overheating, and these openings must not ba
blocked or covered. The openings should never be
blocked by placing the video product on a bed,
sofa, rug, or other similar surface. This video pro-
duct should never be placed near or over a radiator
or heat register. This video product should not be
placed in a built-in installation such as a bookcase
'or rack unless proper ventilation is provided or the
manufacturer's instructions have been adhered to.
SEAVICEENTRANCE
POWER LINES
SERVICE
ENTRANCE
CONDUCTORS
GROUND
WIRE 8.0
GROUND
CLAMPS
2
POWER
SOURCES
This video product should be
operated only from the type of power source in-
dicated on the matking label. If you are not sure of
the type of power supply to your home, consult
your appliance dealer or local power company. For
video products intended to operate from battery
power, or other sources, refer to the operating in-
structions.
<VRB1016>
POWER SERVICE
GROUNDING ELECTRODE SYSTEM
fe g. anterior metal water pipe!
REQUIRED BY
u
LOCAL CODES.
SEE
u
NEC SECTION 810-21 (fh.
TO EXTERNAL ANTENNA
TERMINALS OF PRODUCT
GROUND
WIRE ab
OPTIONAL ANTENNA
GROUNDING ELECTRODE
JONDING
iT
DRIVEN 8 FEET (2 44 mi
SOMPER cy
it— into. THE EARTH IF
it
The exclamation point within an equilateral triangle is
intended to alert the user of the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
SERVICING
Do not attempt to service this video
product yourself as opening or removing covers
may 'expose you to dangerous voltage or other
hazards: Refer all servicing 10 qualified service per-
sonnel.
DAMAGE REQUIRING SERVICE
Unplug this video product from the wall outlet and
refer servicing to qualified service personne! under
the following conditions:
a. yinen the power-supply cord or plug is dam-
aged.
b. If liquid has been spilled, or objects have fallen
into the video product.
c. If the video product has been exposed to rain or
water.
d. If the video product does not operate normally
by following the operating instructions. Adjust only
those controls that are covered by the operating in-
structions as an improper adjustment of other con-
trols may result in damage and will often require ex-
tensive work by a qualified technician to restore the
video product to its normal operation.
@. if the video product has been dropped or the
cabinet has been damaged.
f. When
the video product exhibits a distinct
change in performance — this indicates a need for
service.
REPLACEMENT PARTS
— When replacement parts
are required, be sure the service technician has
used replacement parts specified by the manufac-
turer or having the same characteristics as the
original part. Unauthorized substitutions may result
in fire, electric shock or other hazards.
SAFETY CHECK
Upon completion of any service
or repairs to this video product, ask the service
technician to perform safety checks to determine
that the video product is in proper operating condi-
tion.
OUTDOOR
ANTENNA GROUNDING
-— If an out-
side antenna is connected to the antenna terminal,
be sure the antenna system is grounded so as to
provide some
protection against voltage surges
and built-up static charges,
In the U.S.A. section 810 of the National Electrical
Code, ANSI/NFPA No. 70-1984, provides informa-
tion with respect to proper grounding of the mast
and supporting structure, grounding of the lead-in
wire to an antenna discharge unit, size of ground-
ing conductors, location of antenna-discharge unit,
connection
to
grounding
electrodes,
and
re-
quirements for the grounding electrode.
See Fig. A.
a)
Use No. 10 AWG (5.3 mm?)
STAND-OFF
copper wire, No.
8 AWG
INSULATORS b
(8.4 mm?) aluminum wire,
No.
17 AWG
(1.0 mm?)
copper-clad
steel
wire,
bronze wire or larger wire as
ground wire.
ANTENNA
.
LEAD.IN WIRE
b)
Secure antenna Jead-in and
ground wires to house with
stand-off insulators spaced
from 4 feet (1.22 meters) to
6 feet (1.83 meters) apart.
ENNA
"
DISCHARGE UNIT ¢
c)
Mount
antenna
discharge
unit as closely as possible to
where lead-in enters house.
d}
Use jumper wire not smaller
than No.6 AWG (13.3 mm?)
copper,
or the equivalent,
when a separate antenna-
grounding electrode is us-
ed.
See NEC Section 810-21 (j).
'
a
i
|
|
:
i
7
|
£
i
4
|
|
g
t {
FEE
TSE
EEE
EEE
DET
IEEE
TEENS
ESE
TABLE
TI
» et
8
OER
SE
BPE
ESS EEE
SP
ET
RP
OTE
PTE
TEES
EOE
STR
ITS
SSE
TIE
OT T T T

Advertisement

loading