Security Screen - ASROCK EC262D4U-2L2T User Manual

3.6 Security Screen

This section allows user to set or change the supervisor/user password for the system. For
the user password item is allowed user to clear it.
Administrator Password
Set or change the password for the administrator account. Only the administrator has
authority to change the settings in the UEFI Setup Utility. Leave it blank and press enter to
remove the password.
User Password
Set or change the password for the user account. Users are unable to change the settings in
the UEFI Setup Utility. Leave it blank and press enter to remove the password.
Secure Boot
Use this item to enable or disable support for Secure Boot. If Secure Boot is Enabled,
Platform Key (PK) is enrolled and the System is in User mode. The mode change requires
platform reset.
Secure Boot Mode
Support Standard or Custom. In Custom mode, Secure Boot Policy variables can be con-
figured by a physically present user without full authentication.
72