2.7 Jumper Setup
The illustration shows how jumpers are setup. When the jumper cap is placed on the pins,
the jumper is "Short". If no jumper cap is placed on the pins, the jumper is "Open". The
illustration shows a 3-pin jumper whose pin1 and pin2 are "Short" when a jumper cap is
placed on these 2 pins.
Security Override Jumper
(3-pin SEC_OR1)
(see p.6, No. 34)
CPU PECI Mode Jumper
(3-pin PECI1)
(see p.6, No. 29)
Descriptor Security
Override
CPU PECI connected to
PCH
EC262D4U-2L2T
EC266D4U-2L2T
Not override (Default)
CPU PECI connected to
BMC (Default)
21