Table of Contents
Advertisement
Chapter 3 UEFI Setup Utility
3.1 Introduction
This section explains how to use the UEFI SETUP UTILITY to configure the system. The
UEFI chip on the motherboard stores the UEFI SETUP UTILITY. Run the UEFI SETUP
UTILITY when starting up the computer. Please press <F2> or <Del> during the Power-
On-Self-Test (POST) to enter the UEFI SETUP UTILITY; otherwise, POST will continue
with its test routines.
Restart the system by pressing <Ctrl> + <Alt> + <Delete> to enter the UEFI SETUP UTIL-
ITY after POST, or by pressing the reset button on the system chassis. This allows user to
restart by turning the system off and then back on.
Because the UEFI software is constantly being updated, the following UEFI setup screens
and descriptions are for reference purpose only, and they may not exactly match what see-
ing on the screen.
3.1.1 UEFI Menu Bar
The top of the screen has a menu bar with the following selections:
Item
Main
Advanced
Server Mgmt
Event Logs
Security
Boot
Exit
Use <
> key or <
then press <Enter> to get into the sub screen.
38
Description
To set up the system time/date information
To set up the advanced UEFI features
To manage the server
For event log configuration
To set up the security features
To set up the default system device to locate and load the
Operating System
To exit the current screen or the UEFI SETUP UTILITY
> key to choose among the selections on the menu bar, and
Advertisement
Table of Contents
