Bmc Tools - ASROCK EC262D4U-2L2T User Manual

3.4.3 BMC Tools

KCS Control
Select this KCS interface state after POST end. If [Enabled] us selected, the BMC will
remain KCS interface after POST stage. If [Disabled] is selected, the BMC will disable KCS
interface after POST stage
Restore AC Power Loss
This allows user to set the power state after an unexpected AC/power loss. If [Power Off]
is selected, the AC/power remains off when the power recovers. If [Power On] is selected,
the AC/power resumes and the system starts to boot up when the power recovers. If [Last
State] is selected, it will recover to the state before AC/power loss.
Load BMC Default Settings
Use this item to Load BMC Default Settings
70