Table of Contents
Advertisement
PC Connection
PHOTOVU Link & CARD LINK Driver
An image stored in the DV Tape can be transferred to your PC (Personal Computer).
System Requirements for PHOTOVU LINK
& CARD LINK Driver
* Intel® Pentium® Processor
(for installation).
* Microsoft Windows® 95 or Windows® 98
+ RS-232C serial port (D-Sub 9-pin).
* RAM: 16 MB or more
An adaptor (D-Sub 9-pin male to a
* 256 color monitor (full color
* Mouse or other pointing device.
recommended).
RS-232C
(D-Sub 9-pin)
(Default is COM1.)
PC Connector
2
PC Connecting
Cable for Windows
(Supplied)
o
oO
D
Q,
t
"Tl
0
c)
mal
=
um
©
o
Connection
1 Turn off your PC.
Connect the Digital Video Camcorder to your PC (Windows) using
the RS-232C PC connecting cable (supplied).
* Before connecting the Palmcorder to the PC, make sure the PC
power is off to insure that images are transferred properly.
Turn on your PC.
Set the Palmcorder POWER to VCR.
* For extended periods of use, it is recommended to use the AC Adaptor
as a power source.
* Refer to PC or Windows manual to identify which COM port to be used
for connection.
65
Advertisement
Table of Contents
