Digital Functions A A Aaa - Panasonic Digital Palmcorder PalmSight PV-DV800 Operating Instructions Manual

Special Features
Other Digital Functions
Use the following features to add interest
and professionalism to your recordings or
playback. Select from eleven special
effects.
JOG KEY
POWER
Switch
MENU Button
MIRROR
Symmetrical image from the current
camera picture.
STROBE
The recording appears as a sequence of
still frames.
MOSAIC
The picture appears in a mosaic pattern.
SLIM
The picture is expanded vertically.
TRAIL
The subject being recorded creates a trail
when in motion.
STRETCH
The picture is expanded horizontally.
GAIN UP (Not available during playback)
Picture sensitivity is increased.
* Only Manual Focus is available.
WIPE
Successive scenes are separated in a way
which simulates the drawing of a curtain.
MIX
The current scene is mixed in with the
following scene during scene changes.
SEPIA (Only available during playback)
The picture is played back in sepia,
brownish color, giving it an antique look.
MONO (Monotone) (Only available during
playback)
The picture is played back in black-and-
white.
1 Set POWER to CAMERA or VCH.
* The POWER lamp lights red.
* Be sure POWER is fully turned to
CAMERA or VCR position.
Press MENU to display the menu
screen.
Press JOG KEY to select
in the CAMERA mode
menu screen or ARENAS in
the VCR mode menu screen, then press
JOG KEY to display the CAMERA
FUNCTION or VCR PLAY FUNCTION
menu screen.
Rotate JOG KEY to select
AU Teile), and then press JOG
KEY repeatedly to select one of the
Digital Function listed at the left.
To cancel the Digital Function, press
down on JOG KEY to select OFF.
* The EIS and Digital Zoom features are
turned off automatically when one of the
Digital Functions listed at left is
selected.
* Refer to the Types of Digital Effects at the
left.
To use the WIPE function:
a.In Camera mode, set the "D.FUNCTION"
item in the main menu screen to "WIPE"
(page 24).
b. Press RECORD/PAUSE to start
recording.
c. Press RECORD/PAUSE to pause the
recording. The last scene will be
memorized.
d. Press RECORD/PAUSE to start
recording again. The new scene will take
the place of the memorized scene.
To use the MIX function:
a.In Camera mode, set the "D.FUNCTION"
item in the main menu screen to "MIX"
(page 24). Then, perform steps b-d
above.
The memorized scene and the new
scene will appear mixed as the scene
changes from one to the other.
1
* When Photo Title is set, WIPE/MIX mode
becomes Photo Title. Photo Title is
finished, Digital Function become OFF.
55