Memory Function; Storing Settings (Save); Calling Up A Patch (L0Ad) - Roland AP-700 Owner's Manual

Memory Function
You can use the Memory function to attach names and
comments to 16 types of settings, and save these as
Patches. The contents of these Patches can then be called
up and used whenever you need them. It's also possible to
modify what you've called up and save it as a new Patch.
Storing Settings (Save)
This stores the current settings in memory.
MENU > MEMORY P
MEMORY
: ANNOUNCEMENT
'CONFERENCE ROOM
: CONCERT
: =
'STAGE MONITOR
VOCAL
:CONCERT HALL
(LIVE HOUSE
1. Move the cursor to "SAVE" and press (ENTER).
2. Use the cursor buttons to move the cursor to the
Patch number to serve as the destination for
saving, and press (ENTER).
3.The display changes to the Patch Name set-
tings screen. Move the cursor to the text input
area and use the (VALUE) buttons to change
the characters.
Repeat step 3 until you've finished inputting the
Patch Name and comment.
4. Press (ENTER).
5. Press (ENTER) to save the Patch.
If you want to start over, move the cursor to
(CANCEL) and press (ENTER).
Calling Up a Patch (Load)
This calls up a Patch stored in memory.
MENU > MEMORY >
1. Move the cursor to "LOAD" and press (ENTER).
2. Use the cursor buttons to move the cursor to the
patch number to choose the patch you want to
call up, and press (ENTER).
The Patch Name and comment stored with the Patch
you've selected appear on the display.
3. Press (ENTER) to load the Patch.
If you want to select over, move the cursor to
(CANCEL) and press (ENTER).
23