Zoom/Scroll For The Display (Common For All Modes); Editing System Parameters; Audio I/O (Audio Input And Output) - Roland AP-700 Owner's Manual

[TYPE] (OFF, -6 dB/oct, or —12 dB/oct)
This sets the type of high-pass filter.
OFF: No HPF is used.
-6 dB/oct: This type cuts -6 dB per octave.
~12 dB/oct: This type cuts -12 dB per octave.
Zoom/Scroll for the Display
(Common for All Modes)
"This lets you set the range displayed when using Zoom or
Scroll on the display.
GRPH >
100 200 S00 ik @k Sk 10k 20k
1. Move the cursor to the function to be set.
A: Scrolls (moves) through the displayed levels.
B: Performs a zoom (magnification or reduction) on the
displayed levels.
Cc: Scrolls (moves) through the displayed frequencies.
Performs a zoom (magnification or reduction) on the
displayed frequencies.
2.Use the (VALUE) buttons to set the display
range.
Editing System Parameters
Audio I/O (Audio Input and Output)
The AP-700 can be input and output for analog and digital
signals simultaneously. Here you can adjust the respective
analog and digital input and output levels.
Information on digital /O (input and output) is shown on
the display.
<ANALOG>
[INPUT] (— - to 0.0 dB)
MENU > SYSTEM > AUDIO 1/0 >
This sets the input level for analog input.
* When only digital input is used, set this to "~ 0."
[OUTPUT] (- « to 0.0 dB)
MENU > SYSTEM P AUDIO I/O >
This sets the output level for analog output.
<DIGITAL>
[INPUT] (— 2 to 0.0 dB: ON or OFF)
MENU > SYSTEM > AUDIO 1/0 >
This sets the input level for digital input. It also sets
whether digital output is used (ON) or not used (OFF).
* When only analog input is used, set this to "OFF."
[OUTPUT] (- ~ to 0.0 dB: ON or OFF)
MENU > SYSTEM > AUDIO 1/0 >
This sets the output level for digital output. It also sets
whether digital input is used ("ON") or not used ("OFF").
21