Sony HANDYCAM DCR-DVD610 Operating Manual page 21

Step 2: Chargingthe batterypack
m
=
DC plug Power cord (mains lead)
You can charge the "InfoLITHIUM"
battery pack (H series) (p. 119) after
attaching it to your camcorder.
O Notes
• Your camcorder operates only with
"InfoLITHIUM" battery pack (H series),
4
/ Turn the POWER switch in the
direction of the arrow to OFF
(CHG) (the default setting).
rt
Attach the battery pack by sliding
it in the direction of the arrow
until it clicks.
3
Connect the AC Adaptor to the
DC IN jack of your camcorder.
(-)pen tile jack cover, and connect tile
DC plug of the AC Adaptor.
Match tile • mark oil tile DC plug with
tile • inark
on
your camcorder.
4
Connect the power cord (mains
lead) to the AC Adaptor and the
wall outlet (wall socket).
Tile CHG (charge) lamp lights up and
charging starts.
5 The CHG (charge) lamp turns off
when the battery is fully charged.
Disconnect the AC Adaptor from
the DC IN jack.
O Notes
• Disconnecl the AC A&q)tor from the DC IN
.i.ck hokling both the camcorder
nnd ltle DC
plug.
Continued._
21