Table of Contents
Advertisement
4.2
Connecting the Transducer
CAUTION:
Turn OFF the system subswitch or stop transmission by FREEZE switch
before connecting or disconnecting a transducer. If a transducer is
connected or disconnected with an image displayed, the system and/or
the transducer may malfunction.
(1) Connect the transducer and turn the lock
handle clockwise to lock the connector.
(2) When disconnecting the transducer, turn
the lock handle counterclockwise to
unlock the connector and then hold the
connector and pull it straight out.
No. 2B730-973EN*D
4-2
Lock
Lock handle
*
Advertisement
Table of Contents
