Bensons for Beds TATUM STK778301 Assembly Instructions

Bensons for Beds TATUM STK778301 Assembly Instructions

1 drawer bedside table

Advertisement

Minimum Two
Persons Assembly
20 MIN
Approximate
Assembly Time
Regrettably self-assembly items cannot be returned once assembly is part or fully completed
unless the items are found to be faulty. Should you need to return the unassembled product,
please repack in its original packaging.

Important information

— We suggest you spend a short time reading through this leaflet and then follow the simple
step-by-step instructions.
— Carefully check that you have all the parts before beginning assembly.
— Keep fittings out of children's reach and keep children well away from construction area.
— We suggest you retain these instructions for future reference.
— In the unusual event of an issue with your product would you please quote the batch I.D.
number situated on the main parts of the frame.

Product information

— Product finished in Black colour.
— 1 drawer bedside table.

Care instructions

— Avoid exposing the furniture to excessive heat or direct sunlight as this can cause cracking and
deterioration of the color.
— Periodically check & re-tighten any fastener.
— Periodically dust lightly with a clean soft cloth.
— Do not use silicone based furniture polish.
— Any spills should be removed immediately with a damp cloth.
— TAKE CARE WHEN MOVING THE FURNITURE AND NEVER DRAG THE PIECES ACROSS
THE FLOOR, AS THIS WILL CAUSE DAMAGE TO THE JOINTS
1 DRAWER TATUM BEDSIDE TABLE
STK778301
Assembly Instructions
Please keep these instructions for future reference.
Page<1/2>

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TATUM STK778301 and is the answer not in the manual?

Questions and answers

Summary of Contents for Bensons for Beds TATUM STK778301

  • Page 1 1 DRAWER TATUM BEDSIDE TABLE Minimum Two STK778301 Persons Assembly Assembly Instructions Please keep these instructions for future reference. 20 MIN Approximate Assembly Time Regrettably self-assembly items cannot be returned once assembly is part or fully completed unless the items are found to be faulty. Should you need to return the unassembled product, please repack in its original packaging.
  • Page 2 1-drawer bedside table Component of Carton Hardware List (B) Ø6 Washer (A) M6 60 Bolt (2) Leg 4 (1) Top Frame 1 (D) 4MM Allen key (C) Ø6 Spring Washer (E) Pad Tools Required (Not Supplied) Step 1 Step 2 Page<2/2>...

Table of Contents