Advertisement
3. SERVICING
@ Disassembly
l.
ny wh
Remove
the screw located at the center of the bottom
cabinet to take out the bottom
cabinet. The chassis will then be removed together with the top cabinet.
. Pull out the two batteries.
. Carefully peel off the black masking sheet which is applied to the chassis.
. Carefully peel off the tape (silver color) which is applied to the chassis.
. The chassis is being fixed by 13 pawls which are located on the top cabinet. By using a
pincettes, straighten each of these pawls, then the chassis, top cabinet, liquid crystal and
anisotropic tape will all be independent from each other.
. Remove the display spacer from the top cabinet, then the filter will also be removed.
Note:
Different from the above, as for the sets up to 250,000th unit, the display spacer
cannot be removed since it is directly fixed to the top cabinet. Refer to ""Reasembly
4" described later.
. Remove battery terminai.
Advertisement
