Table of Contents
Advertisement
USER INTERFACE
BASIC SETTINGS: The basic settings in your water heater can
allow you to change the temperature unit, screen adjustment
lock/unlock, enabling/disabling the alarm beep, and your
EcoNet network instance. Simply select the setting by tapping
it, and press the Up/Down arrows to make adjustments. WiFi
setup can be accessed from this screen as well.
basic settings
Temperature Display
Screen Adjustment Lock?
Beep On Alarm
EcoNet Network Instance
Elevation
CONFIGURATION SETTINGS: The configuration settings on your
water heater allows you to control the heating mode, setting the
recirculation pump, auxiliary input/output, enabling/disabling
modulation, and how your hot water heater reacts to a detected
leak.
config. settings
Heating Mode
Recirc. Pump Config
Aux Output Select
When Leak Detected
Shutoff Valve Config
The setting can be highlighted by tapping and then adjusted
with the up/down arrows.
The Heating Mode can be set as Normal or MaxMode™.
MaxMode™ shall be used when there is an increased demand
for hot water. The heater provides a 15% increase in hot water
availability by going into Heating mode sooner following a
draw.
After 2 hours of non-heating, the heater will operate like
normal. Once a heating demand is present, the heater will go
back into MaxMode™. This pattern continues for a duration of
72 hours, at which time the heater will return to Normal mode.
Recirculation Pump Configuration can be set to the following:
Off - use this setting when the recirculation pump is not in use,
or not installed.
On - use this setting to manually turn on the pump. Useful for
testing the setup. Not recommended for general use.
36
Fahrenheit
No
Enabled
1
Normal
Max
On Demand
Recirc. Pump
Alarm Only
Not Installed
Schedule - The recirculation pump will run on a 15 min On/15
min Off cycle whenever the heater is set to the "Home" mode
(see SCHEDULE SETTINGS). When the heater is in an Away
mode, the recirculation pump will not run.
On Demand - The recirculation pump can be triggered to run
from the mobile app. When triggered from the app, the pump
will run for 15 min.
This water heater has a modulation algorithm that can be
disabled by tapping 'No' in front of Modulation Disabled and
making adjustments by tapping the up/down buttons.
SCHEDULE SETTINGS: The schedule settings allows you to
control when your hot water heater will be enabled/disabled.
Your heater allows you to select a day you want and set the
times when the heater will be in use. You can also copy/paste
the day you select and apply it to other days as well.
schedule settings
Time
Schedule
Morning:
08:00 am
Occupied
Night:
06:00 pm
Occupied
Mon.
Tue.
Wed.
Thu.
copy
paste
cancel
day
day
By selecting a day and then accessing
the copy function, you can paste that
day's settings onto other
TIME/DATE SETTINGS: By selecting time/date you can change
the water heaters current set time. You can also select the
daylight savings time function to automatically adjust the time
for daylight savings.
set to time and date
:
10
54
:
Jan.
11
accept
The D.S.T function allows you
to adjust the time for daylight
savings time.
STATUS MENU
120°
The Status screen provides information on the current operating
status, diagnostics and sensors. This screen also provides
information on the WiFi status.
warm
hot
Settings
Status
By pressing the Status button, you will be
taken to a prompt showing the state of your
water heater's many features.
Wed. Jan.11, 2:49 pm
Fri.
Sat.
Sun.
The up/down arrows enable
you to adjust the time of the
period run times.
am
2017
D.S.T.
enabled
The up/down arrows allow
you to control the time,
month, day, and year.
Status: Standby
very hot
Disable
Service
Advertisement
Table of Contents
