VTech vt9121 User Manual page 10

(the * key). You can then press the numbers
or symbols you need, and your phone will
send the proper signals.
To end the call, press OFF or place the
handset back in the base. The phone will
automatically go back to rotary (dial-pulse)
service.
Programming The Ringer Type
The handset ringer is capable of four different
types of ringing tones. The following sections
detail how to change the different tones and
to turn off THE ringer on the handset.
To program, the handset must be OFF.
To select a different ringer type do the
following:
* Press PGM
* Press the # key.
* Press a key 1..4 to select a ringer type.
* Press the OFF key to exit.
Turning Off The Ringer
To turn off the ringer on the handset, do the
following:
* Press PGM
* Press the # key
* Press 5 to turn off the ringer
* Press the OFF key to exit
* To turn the ringer on again, see
Programming the Ringer Type.
Checking The Ringer
To check the ringer which is currently
programmed, do the following:
* Press PGM
* Press the # key
* Press 0
* Press the OFF key to exit
Memory Dialing
The VT 9121 can store up to 10 different
phone numbers that you can dial just by
pressing phone, MEM and one of the number
keys (0-9).
OPERATING INSTRUCTIONS
Programming Speed Dial Numbers
The handset must be OFF.
1. Press PGM. The IN USE LED will blink to
indicate that you are in the programming
mode.
2. Press the number of the memory location
you wish to store the number in (0-9).
3. Using the dial pad, dial the number you
want to store. The number can be up to 16
digits long. The number can be entered
manually or by using REDIAL.
4. Press MEM to store the phone number to
the key you selected.
The phone now exits PGM mode and you will
hear a long confirmation beep.
Speed Number Dialing
1. Press PHONE to get a dial tone.
2. Press MEM and the memory location
number key (0-9).
For example, to dial the number you assigned
to key '8', you would press PHONE, MEM, 8.
To Change or Replace a Speed Dial Number
To change or replace a stored number in speed
dial memory simply enter the new number and
store it in the memory location you wish to change.
For example, to change the number stored in
memory position 7 to 555-1111, you would press
PGM, 7, 555-1111, MEM.
Storing Pauses in Memory
To insert a pause in a phone number, press and
hold the number before the position where the
pause is to be inserted. Hold the number key down
until it beeps twice. The pause is 2 seconds in
length. For longer pauses, press and hold the key
until it beeps three or four times. Each additional
beep indicates an additional 2 second pause.
If your phone is connected to a PBX you can store
the PBX access number and a pause before the
phone number. For example, to store 9-PAUSE-
555-1234 in memory location 8 do the following:
1. Press PGM
10