Base Settings - VTech vt2431 User Instructions

Vtech vt2431: user guide
Table of Contents

Advertisement

The GIGAPHONE Base unit has several settings that can be adjusted according
to your preference and system requirements.
Select Base Ringer Melody:
The phone must be off.
Press the star key three times (
and the Power and Line In Use LEDs will flash rapidly.
Press the 1,2,3,4,5, or 6 keys to select the Ringer Melody. After each key
press, the Base will emit a 1-second preview of the selected ringer.
To save the selected ringer (and exit) press # .
To exit without saving press
Select Tone / Pulse:
The phone must be off.
Press the star key three times (
and the Power and Line In Use LEDs will flash rapidly.
Press the 7 key to toggle between TONE and PULSE dialing mode. The
Line In Use LED will toggle ON when TONE is selected and OFF when
PULSE is selected.
To save the TONE/PULSE selection (and exit) press # .
To exit without saving press
Select Base Ringer Volume and OFF:
The phone must be off.
Press the star key three times (
and the Power and Line In Use LEDs will flash rapidly.
Press the volume up and down keys (
volume. After each press of the volume keys, the Base will emit the selected
Ringer and volume setting for one second.
To turn the Base ringer OFF, press the volume down key (
no ringer preview is played.
To save the Ringer Volume selection (and exit) press # .
To exit without saving press

Base Settings

). The Base will emit a happy tone
***
.
*
). The Base will emit a happy tone
***
.
*
). The Base will emit a happy tone
***
/
) to adjust the Base Ringer
.
*
24
) until

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gigaphone

Table of Contents